EXERCISES. Active Vocabulary to Text С

Active Vocabulary to Text С

NOTES

¹costly - дорогой, дорогостоящий

²long working life - длительный период эксплуатации

distortion - деформация	rim - обруч
fracture - излом	thread - резьба
dimension - размер	eliminate - устранять
to be sharp - быть острым	data - данные
loosening - ослабление	blunt - тупой
restore - ремонтировать	reduction - уменьшение

1. Find Infinitives in the following sentences and state their function.

1. The main faults may occur in the frames.

2. To make the procedure easier heat the frame.

3. To eliminate the distortion heat the frame.

4. It is necessary to replace the worn bushings, shafts, rims, and threads.

5. Power-take-off-cultivation machinery is costly and needs regular maintenance in order to ensure long working life.

6. Tines are arranged across the frame to allow free passage of soil.

2. Find the sentences with the modal verbs in the text. Try to use their equivalents, where it is possible.

3. Insert the necessary words.

1. Power-take-off-driven cultivation...is costly and needs regular maintenance.

2. The rim...can be eliminated by heating.

3. The frames are restored by means of...and heating.

4. Take care of...of the cultivating machinery.

5. A...has a frame with a number of tines.

4. Try to continue the sentences.

1. For all cultivation machinery the main faults can occur in...

2. The frame faults are the following...

3. Frames are repaired by...

4. The main wheel faults are...

5. Rim distortion is corrected by...

6. Tines are mounted on the tractor and its...

7. Power-take-off-driven machinery is...

8. Take care of the cutting parts of...

9. Blunt blades cause...

5. Transform the sentences used in the Passive Voice into sentences in the Active Voice.

1. Rigid tines are used for heavier work.

2. Tines are arranged on the frame to allow free passage of soil.

3. The reversible share is used for seedbed and general work.

4. Worn cutting parts are characterized by the blunt blades.

5. Blunt shares of plows and tines of harrows are heated to be restored.

6. Transform the sentences into the Present Continuous.

1. Cultivation machinery has uniform servicing and technical procedures.

2. A cultivator has a frame with a number of tines, which breaks the soil.

3. Hydraulic attachments help to restore the frame.

4. As a rule we use rigid tines for heavier work.

7. Answer the questions.

1. What mechanisms and devices are called cultivation machinery?

2. Do all of them have uniform servicing and technological procedures?

3. Where can the main faults occur?

4. What are the main faults of the frame?

5. Why is it necessary to eliminate them?

6. How can we eliminate them?

7. What faults are typical of the wheels, axles, and bearing bodies?

8. What role does heating play?

9. Why is it necessary to keep cutting parts into working order?

10. What are the cutting parts of a plow?

11. What faults can we detect in the cutting parts?

12. How can we eliminate them?

8. Read the dialogue.

- Hey, what are you doing here?

- Something has gone wrong with the share.

- What's wrong?

- The tines don't work! They don't break the soil properly. The depth of tine operation is too small. That won't do!

- You are quite right! There are some restrictions concerning the seedbed and working depth. It ranges from 1,5 - to - 4,5 m depending on the model.

- I suppose there are some frame faults. One of them is frame distortion.

- Then you must correct it by heating. But I'm afraid the problem is in the share. The blades are blunted, so sharpen them.

- OK! I'll try to do it. Thanks a lot.

- No problem!

9. Answer the questions on the dialogue.

1. What has gone wrong with the share?

2. Why don't the tines work properly?

3. What is the working depth?

4. What frame fault does the farmer have?

5. What is necessary to do if the blades are blunted?

10. Make up a dialogue on the situation.

Imagine that you are a farmer (an expert in this field of activity). It turns out that the agricultural Academy sent a fourth-year student for a practice. The student is very diligent but he has little practice operating cutting machines. Teach him to operate the cutting machines and explain the main faults of the mechanisms.

11. Read and translate the texts in written form.

Дата добавления: 2014-10-17