Студопедия

КАТЕГОРИИ:


Архитектура-(3434)Астрономия-(809)Биология-(7483)Биотехнологии-(1457)Военное дело-(14632)Высокие технологии-(1363)География-(913)Геология-(1438)Государство-(451)Демография-(1065)Дом-(47672)Журналистика и СМИ-(912)Изобретательство-(14524)Иностранные языки-(4268)Информатика-(17799)Искусство-(1338)История-(13644)Компьютеры-(11121)Косметика-(55)Кулинария-(373)Культура-(8427)Лингвистика-(374)Литература-(1642)Маркетинг-(23702)Математика-(16968)Машиностроение-(1700)Медицина-(12668)Менеджмент-(24684)Механика-(15423)Науковедение-(506)Образование-(11852)Охрана труда-(3308)Педагогика-(5571)Полиграфия-(1312)Политика-(7869)Право-(5454)Приборостроение-(1369)Программирование-(2801)Производство-(97182)Промышленность-(8706)Психология-(18388)Религия-(3217)Связь-(10668)Сельское хозяйство-(299)Социология-(6455)Спорт-(42831)Строительство-(4793)Торговля-(5050)Транспорт-(2929)Туризм-(1568)Физика-(3942)Философия-(17015)Финансы-(26596)Химия-(22929)Экология-(12095)Экономика-(9961)Электроника-(8441)Электротехника-(4623)Энергетика-(12629)Юриспруденция-(1492)Ядерная техника-(1748)

Fuel tank cleaning and repair




Refitting and adjustment

Removal

Accelerator cable

- removal, refitting and adjustment

 

1 Loosen the locknut on the threaded portion of the throttle cable at the throttle body (see illustration).

 

2 Rotate the throttle lever and slip the cable end out of the slot in the lever (see illustration) Release the cable from the retaining clips/ brackets in the engine compartment.

 

3 Remove the driver's side lower facia panel as described in Chapter 11.

 

4 Squeeze together the ends of the retaining clips, and pull the plastic grommet/fitting from the accelerator pedal, then detach the cable

(see illustration). Remove the two boltssecuring the cable retainer to the bulkhead.

 

5 From inside the vehicle, pull the cable through the bulkhead.

 

 

6 Refitting is the reverse of removal. Make sure the cable casing grommet seats properly in the bulkhead.

 

7 To adjust the cable, fully depress the accelerator pedal and check that the throttle is fully opened.


 

- general information

 

 

1 Any repairs to the fuel tank or filler neck should be carried out by a professional who has experience in this critical and potentially dangerous work. Even after cleaning and flushing of the fuel system, explosive fumes can remain and ignite during repair of the tank.

 

2 If the fuel tank is removed from the vehicle, it should not be placed in an area where sparks or open flames could ignite the fumes coming out of the tank. Be especially careful inside garages where a natural gas-type appliance is located, because the pilot light could cause an explosion.





Поделиться с друзьями:


Дата добавления: 2014-12-23; Просмотров: 393; Нарушение авторских прав?; Мы поможем в написании вашей работы!


Нам важно ваше мнение! Был ли полезен опубликованный материал? Да | Нет



studopedia.su - Студопедия (2013 - 2024) год. Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав! Последнее добавление




Генерация страницы за: 0.011 сек.