Студопедия

КАТЕГОРИИ:


Архитектура-(3434)Астрономия-(809)Биология-(7483)Биотехнологии-(1457)Военное дело-(14632)Высокие технологии-(1363)География-(913)Геология-(1438)Государство-(451)Демография-(1065)Дом-(47672)Журналистика и СМИ-(912)Изобретательство-(14524)Иностранные языки-(4268)Информатика-(17799)Искусство-(1338)История-(13644)Компьютеры-(11121)Косметика-(55)Кулинария-(373)Культура-(8427)Лингвистика-(374)Литература-(1642)Маркетинг-(23702)Математика-(16968)Машиностроение-(1700)Медицина-(12668)Менеджмент-(24684)Механика-(15423)Науковедение-(506)Образование-(11852)Охрана труда-(3308)Педагогика-(5571)Полиграфия-(1312)Политика-(7869)Право-(5454)Приборостроение-(1369)Программирование-(2801)Производство-(97182)Промышленность-(8706)Психология-(18388)Религия-(3217)Связь-(10668)Сельское хозяйство-(299)Социология-(6455)Спорт-(42831)Строительство-(4793)Торговля-(5050)Транспорт-(2929)Туризм-(1568)Физика-(3942)Философия-(17015)Финансы-(26596)Химия-(22929)Экология-(12095)Экономика-(9961)Электроника-(8441)Электротехника-(4623)Энергетика-(12629)Юриспруденция-(1492)Ядерная техника-(1748)

Electronic control system




Air induction system

 

The air induction system consists of an air filter housing, the throttle body and the duct connecting the two. On Non-VVT-i engines, an Intake Air Temperature (IAT) sensor monitors the temperature of the incoming air, and a Vacuum Sensor (VS) monitors the level of vacuum in the intake manifold, and therefore the engine load. On VVT-i engines, an airflow meter is located in the air filter outlet ducting, which also measures the air temperature. This information helps the ECM determine the amount of fuel to be injected by the injectors.

 

The throttle plate inside the throttle body is controlled by the driver. As the throttle plate opens, the speed of the incoming air increases, which lowers the temperature of the air, and the manifold vacuum decreases. The sensors send this information to the ECM, which then signals the injectors to increase the amount of fuel delivered to the intake ports.

 

 

The Computer Control System controls the SEFI and other systems by means of an Electronic Control Module (ECM), which employs a microcomputer. The ECM receives signals from a number of information sensors which monitor such variables as intake air temperature, throttle angle, coolant temperature, engine rpm, vehicle speed and exhaust oxygen content. These signals help the ECM determine the injection duration necessary for the optimum air/fuel ratio. Some of these sensors and their corresponding

 

ECM-controlled relays are not contained within SEFI components, but are located throughout the engine compartment.


 

 

11.7 The injectors should make a clicking sound that rises and falls with the engine speed




Поделиться с друзьями:


Дата добавления: 2014-12-23; Просмотров: 453; Нарушение авторских прав?; Мы поможем в написании вашей работы!


Нам важно ваше мнение! Был ли полезен опубликованный материал? Да | Нет



studopedia.su - Студопедия (2013 - 2024) год. Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав! Последнее добавление




Генерация страницы за: 0.01 сек.