Adjusting clutch

Adjusting Throttle

1Ј®Throttle grip 2.throttle cable

Check free-play(1).

If necessary, adjust to the specified range.

Free-play:1/16ЎЄ3/1in (2.0ЎЄ4.0 mm)

Check:

1Ўў Check the throttle, assembly is positioned properly and the securing bolts are tight.

2Ўў Check for smooth rotation of the throttle (1) from fully open to fully closed in all steering positions. If there is problem, see your Dirt Bike dealerЎЈ

3Ўў Inspect the condition of the throttle cable (2) from the throttle grip down to the carburetor. If the cable is kinked or chafed, have it replaced.

4Ўў Check the cable for tension or stress in all steering positions.

5Ўў Lubricate the cable to prevent premature rust and corrosion.

Clutch handle right side of engine

Adjustment:

1Ўў Loosen the adjuster lock nut(1)

2Ўў Turn the clutch adjuster (2) clockwise one turn; do not turn excessively.

3Ўў Slowly turn the adjuster counterclockwise until a slight resistance is felt 3

4Ўў From this position, turn the adjuster clockwise1/8to1/4turn, and tighten the lock nut.

5Ўў After adjustment, test ride the motorcycle to be certain the clutch operates properly.

6Ўў Generally, the only operation is performed on the clutch that is adjustment of the position of lever

To perform the adjustment, lift rubber dust cover D and turn adjuster C. The lever must have 5mm of side stroke.

Дата добавления: 2014-12-23