Battery. Note:Fitting details for wiper blades vary according to model, and according to whether genuine Toyota wiper blades have been fitted

Wiper blades

Note: Fitting details for wiper blades vary according to model, and according to whether genuine Toyota wiper blades have been fitted. Use theprocedures and illustrations shown as a guide for your car.

₁Check the condition of the wiper blades; if they are cracked or show any signs of deterioration, or if the glass swept area is smeared, renew them. Wiper blades should

be renewed annually.

₂To remove a windscreen wiper blade, lift the wiper arm, rotate the blade on the arm and press the retaining clip (arrowed) towards the arm.

₃Slide the blade down the wiper arm and remove it from the vehicle, taking care not to allow the arm to damage the windscreen.

0•16 Weekly checks

Caution: Before carrying out any work on the vehicle battery, read the precautions given in 'Safety first!' at the start of this manual.

• Make sure that the battery tray is in good condition, and that the clamp is tight.

Corrosion on the tray, retaining clamp and the battery itself can be removed with a solution of water and baking soda. Thoroughly rinse all cleaned areas with water. Any metal parts damaged by corrosion should be covered with

a zinc-based primer, then painted,

• Periodically (approximately every three months), check the charge condition of the battery as described in Chapter 5A.

• If the battery is flat, and you need to jump start your vehicle, see Roadside Repairs.

Дата добавления: 2014-12-23