Assembling Flow Chart of Customer

SECTION11 Warranty Service

SECTION10 principle Diagram

SECTION9 Technical Specifications

SECTION8 What to Do In An Emergency

SECTION7 Maintenance and Adjustments

SECTION6 Use and Operate Control

SECTION5 Preparing Before Using

SECTION4 Vehicle Identification

SECTION3 General Information

SECTION2 Safety, warning and Caution Messages

SECTION1 Assembling Steps and Parts Pictures

Assembling Flow chart of customerЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®2

Checking Spares Parts in the CartonЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®2

Important Safety InformationЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®3

Component LocationsЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®8

Frame, Engine and EPA IdentificationЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј® 10

Pre-ride CheckingЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®10

Knowing Before RidingЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®11

Operating Main PartsЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј® 12

Operating ProcedureЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®18

Maintenance ProcedureЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®19

Adjustments ProcedureЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®21

Trouble ShootingЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®24

Technical Data TableЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®25

Circuit DiagramЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®26

Warranty CertificateЈ®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®Ј®27

NOTICE......................................................28

Assembling Steps AND Parts pictures

It is strongly suggested that the assembly of the dirt bike be completed by an adult to ensure proper assembly for safe operation.

Start to open the carton and take it away. Please be careful to check motorcycle and not to lose any parts. There are parts, Front Wheel, Tool Bag, Key, Manual, Kick lever, Fairing and Alloy Brake Pedal etc. inside.

Step1: Open carton

Step 2: Back-out Packing Steel Frame.

Step3: Assembling Front Wheel

NOTE:1,check front wheel and the space;2,fix front wheel;3,screw down the axleЎЇs nuts; 4, Check the front wheel brake before rotating flexible and effective

Step 4: Assembling Swing Arm Bracket

Step 5: Assembling and Adjusting Handlebar.

Step6: Assembling Fairing

Step 7: Cut Strip of EngineЎЇs Waste Rubber Pipe

Step 8: Fill fuel tank as specified in owners manual.

Step 9: Debugging Dirt Bike (brakeЎўpressure of tyreЎўengine and putting into oil will be checked)

Дата добавления: 2014-12-23