Digital computer operation

Выполните письменный перевод текста по вариантам.

Опишите схему.

93__________________________________ Unit 7. Storage

13. Переведите предложения, содержащие всевозможные
формы причастий: Participle I, Participle II, Perfect
Participle Active и Perfect Participle Passive.

1. Electromechanical memories depend upon moving me­chanical parts for their operation. 2. The time required for the computer to locate and transfer data to and from a storage me­dium is called the access time. 3. Being not visible software makes possible the effective operation of computer system. 4. Having invented magnetic tapes the Germans used them as the secondary storage medium. 5. When properly programmed computers don't make computational errors. 6. Having been in­troduced in the early 1960s magnetic disc storage has replaced magnetic tape storage. 7. The control unit interpreting instruc­tions is one of the important parts of any computer system. 8. Data recorded in the form of magnetized dots can be arranged to represent coded patterns of bits. 9. As contrasted with mag­netic tapes magnetic discs can perform both sequential and ran­dom processing. 10. While having no moving mechanical parts electronic memories can transfer data at very high speed.

1. A digital computer is a machine capable of performing operations on data represented in digital or number form. The individual operations performed by a digital computer are very simple arithmetic or logical processes involving the manipula­tion of the bits in words or characters of information. The great power of any digital computer rests in the ability to store large volumes of data and to perform these operations at extremely high speed.

In most electronic digital computers the method of number representation is based on the system of binary notation. The binary notation system is most widely used because of the con­venience in constructing logical circuits and storage devices ca­pable of handling data in this form. For example, a magnetic memory unit consists of many thousand individual magnetic cells, each of which can be energized in either of two ways to represent the binary digits 0 or 1. If these cells are grouped to form words or binary coded characters, information can be

Английский язык. Основы компьютерной грамотности 94

stored for processing in units of specified size. In the same way, digital data can be recorded as a series of magnetized spots on a magnetic tape or a magnetic disk.

2. The computer has pervaded most fields of human activity and is the most important innovation of our age. Born out of the technology of communication, it is capable of handling enormous amounts of information at tremendous speeds. What makes it so potent is the fact that a single mechanism can per­form any information-processing task. The same mechanism can control industrial processes, guide space vehicles or help to teach children. This diversity of tasks is made possible by the simple idea of the stored program.

A program is the enumeration of determining commands. It specifies the method used for the solution of a problem in de­tail. When the machine is. in operation, both the commands and the numbers to be processed are constantly being taken out of and put into a depository of information known as a memory.

It can be seen that the processes performed by a digital com­puter are essentially simple. These operations can be performed at extremely high speeds and with a high degree of coordina­tion between the different functional units of the hardware sys­tem, and this ability means that digital computers can under­take highly complex tasks.

15. Прочтите внимательно текст. Составьте на английском языке план текста, выделив основные его темы. План можно составить в вопросной, назывной или тезисной форме. Познакомьтесь с образцами планов, представ­ленными после текста; сравните со своим планом.

MEMORY

It is interesting to note that memory, one of the basic com­ponents of the computer, is often called storage. It stores cal­culation program, the calculation formulae, initial data, inter­mediate and final results. Therefore, the functions of the computer memory may be classified in the following way. Firstly, the computer memory must store the information transmitted from the input and other devices. Secondly, memory should produce the information needed for the computation process to all other devices of the computer.

95 Unit 7. Storage

Generally, memory consists of two main parts called the main, primary or internal, memory and the secondary, or ex­ternal memory. The advantage of the primary memory is an extremely high speed. The secondary memory has a compara­tively low speed, but it is capable of storing far greater amount of information than the main memory. The primary storage takes a direct part in the computational process. The second­ary storage provides the information necessary for a single step in the sequence of computation steps.

The most important performance characteristics of a stor­age unit are speed, capacity and reliability. Its speed is measured in cycle time. Its capacity is measured by the number of ma­chine words or binary digits. Its reliability is measured by the number of failures (отказ) per unit of time.

План в вопросной форме.

1. What is memory?

2. What is the function of memory?

3. What are the main parts of memory?

4. What are advantages and disadvantages of a storage unit?

5. What are their functions?

6. What are performance characteristics of the main and
secondary memory?

7. What units are performance characteristics measured by?

План в назывной форме

1. The definition of memory.

2. The main functions of memoiy.

3. Classification of memory.

4. Advantages and disadvantages of memory components.

5. The functions of memory components.

6. Performance characteristics of memory.

7. The units for measuring the performance characteristics
of memory.

План в тезисной форме.

1. Memory is one of the basic components of the comput­
er.

2. Memory stores initial data, intermediate and final results.

3. It produces the information needed to other devices of
the computer.

Английский язык. Основы компьютерной грамотности 96

4. Memory consists of the main (internal) and the second­
ary (external) storage.

5. The main memory has high speed, but small capacity; the
secondary memory possesses lower speed but greater ca­
pacity.

6. The main memory performs computation; the secondary
memory provides information sequentially, step by step.

7. The performance characteristics — speed, capacity and
reliability — are measured by cycles, binary digits and the
number of failures per unit of time.

Дата добавления: 2014-11-18