Operating the Ozone Generator Air Purifier

(Front View)

Timer Control Knob Turn clockwise to set the timer for timed operation up to TWO hours.

Turn counterclockwise to set “HOLD” function

Ozone Adjuster for option from 0-5000 mg per hour

Indicator Light Illuminates when unit is in operation.

Ozone Nozzel Connect the ozone output and the silicone tube

(Back View)

Fuse Holder	Houses removable fuse.
	(Spare fuse included, 1 amp, 0.79 inch in length)
Power Cord	100~120 or 220~240 Volt grounded cord (unless otherwise).
Silicone tube and Air stone	one meters silicone tube and one air stone

The Ozone generator is designed to use in unoccupied spaces. It has a timer that will enable it to run for a maximum duration of 2 hours. The timer will then shut the commercial air purifier off. You should allow 40 minutes before returning to the treated area.

To operate the Ozone Generator:

Ø The device should be placed something under the unit bottom for steady.

Ø Connect the ozone output nozzle and the silicone tube(the silicone tube shall be flowed)

Ø Close off the desired area to be treated.

Ø Remove all occupants and pets.

Ø Position the unit as close as possible to the odor source.

Ø In such environments as motels that have individual heating and cooling systems, turn the fan on and set on re-circulate.

Ø Set timer to desired time and leave the room.

Ø Allow 40 minutes before re-entering the treated space.

Ø Return to space & ventilation area.

If you suspect a problem with your unit check the following:

1) Unit is plugged in properly.

2) It’s important that the Ozone Generator Commercial

air purifier be properly grounded to avoid potential shock.

3) Check the fan if it is working and the ozone output if there is gas.

4) Fuse is installed properly and in good condition. To replace fuse, pull out the plastic fuse holder, remove old fuse and insert new fuse. Replacement fuse must be 1 amp (0.79 inch). Refer to picture as follows:

The ozone generator commercial air purifier comes with a 3 Year Limited Warranty.

1) To extend the life, continuous power interval must be 30 seconds or more, please unplug the device if the device are not used for long-term. Also the device should be worked within the specified voltage range.

2) Users normal use of the product in accordance with the instruction manual, the failure of the warranty period, can be a free repair.

3) If the following conditions are paid maintenance during the warranty period:
Misuse, demolition, and modification caused the failure and damage
Drop and faults and damage caused by transport
For other disasters or abnormal voltage caused by the failure or damage.

Дата добавления: 2014-12-24