Operation Instruction

FUNCTION UPDATE

TOOL SETTING

ADD FREE TOKENS

HAND OPERATE

SPECIAL FUNCTION

MILEAGE ADJUST

IMMOBILIZER

Menu Introduction

Menu has 7 options as follows:

It let you program auto transponder keys, auto smart keys and auto remote keys for European cars, American cars and Chinese cars.

It can allow you to read and change mileage data.

It works with various adapters to identify chips.

In certain condition, it can help you match keys and remotes manually.

The tokens for SKP-900 Key Programmer are limited. If you use up, you need to contact your dealer to add your tokens by free.

It can provide you with hardware Info and SN of your device.

It can help you update software online if possible.

This operation instruction will tell you how to use your scan tool. For other vehicles, you can perform it by referring to the instructions or according to operation tips on the screen.

Take FORD as an example, if all key is lost, you can use SuperOBD SKP-900 to match key. Firstly, you must connect this device to the OBDⅡconnector via Main Cable.

Select Vehicle: [FORD]→[FOCUS]:

Press [YES], and select ‘IMMOBILIZER’ according to your vehicle:

Press [YES]

Press [YES]

Press [YES]

ADD KEY: for matching new key

DELETE KEY: for deleting all registered keys and so the lost keys can’t be used neither

We suggest that you delete all keys before matching new keys.

Select [DELETE KEY] and press [YES]:

As shown on the screen, you must add at least 2 new keys to start the engine after deleting all registered keys.

Press [YES]

Press [YES]

Press [YES]

It shows that deleting keys is succeeded.

Press [NO]:

Press [YES]

According to the instruction on screen, you should insert a new key and turn IGN on.

You may see the IMMO indicator light will flash when inserting a key which cannot start Engine.

Press [YES]

Press [YES]

Press [YES]

You have successfully programmed the first new key.

Press [NO]:

Press [YES], continue to program another key:

Press [YES]

Press [YES]

Press [YES]

So far two new keys have been successfully programmed. Now you can use any one of them to start the engine. Of course, if you want add more keys, you just need to repeat the above operations.

Дата добавления: 2014-12-23