Specification elements filling openings

As the plates covering the draft adopted comprehensive series of concrete slabs by 1.465. As the insulation is taken insulation - mineral wool hard, as a vapor barrier - plastic film thickness of 0.2 mm, as adopted roofing waterproofing layer RM - 350 invested in screed of cement-sand mortar.

Specification plates covering elements Table 4.6.

The project adopted lantern on a series of 1,464 width of 6 m length and 60 m, rectangular shape with one tier glass and covered with concrete slabs. Basic design lantern consists of the following elements: Farm lamp, lamp cover, end panel, window panel, vertical connections, fire ladder.

Farm lamp consists of upper belt racks and braces. Openings lantern filled verhnopidvisnymy window panels. Fire ladder placed on the ends of the lantern.

Specification of the main elements of cover

Table 4.7.

The project provides roll roofing is made of three layers of roofing carpet armored upper layer. Since the project adopted comprehensive cover plate, the transverse and longitudinal joints between two cords laid hernitu Ø 40 mm, and filled with concrete to gravel with sizing vapor barrier. Then the joints are filled with mineral wool, which is arranged in cement and sand screed is glued to the roofing mastic strip width of 100 mm.

The outer walls of a manufactured housing made self-supporting single-layer panels of lightweight concrete on porous aggregates of expanded clay. External and internal finishing layers made of cement-sand mortar thickness of 20 mm. The total thickness of the panel is 250 mm. For step 6 columns of panels made in series 1.030. Ground cover is based on the foundation beam on a layer of insulation capillaries cement-sand mortar. Prostinochni and lap panels are attached to the columns using embedded parts.

Specifications wall elements

Table 4.8.

Table 4.10.

Дата добавления: 2015-06-28; Просмотров: 266; Нарушение авторских прав?; Мы поможем в написании вашей работы!