Engine Oil and Oil Filter

ENGINE LUBRICATION SYSTEM 7-9

57001-125 56019-120

Special Tools and Sealant

ENGINE LUBRICATION SYSTEM

Specifications

ENGINE LUBRICATION SYSTEM 7-7

Engine Oil Flow Chart

Item	Standard
Engine Oil Grade Viscosity Capacity Level	API SE, SF, SG or API SH or SJ JASO MA SAE 10W-40 2.8 L (when filter is not removed) 3.0 L (when filter is removed) 3.4 L (when engine is completely dry) Between upper and lower level lines
Oil Pressure Measurement Oil pressure @4 000 r/min (rpm), oil temperature 90°C (194°F)	275 ~335 kPa (2.8 ~3.4 kgf/cm², 40 ~48 psi)

Oil Pressure Gauge, 5 kgf/cm²: Kawasaki Bond (Silicone Sealant):

Oil Pressure Gauge Adapter, M14 × 1.5: 57001-1209

A WARNING
Motorcycle	operation with insufficient,	deteri-
orated, or	contaminated engine	oil	will	cause
accelerated	wear and may result in	eng	ine or trans-
mission seizure, accident, and inju	ry.

Engine Oil Level Inspection

• If the oil has just been changed, start the engine and run
it for several minutes at idle speed. This fills the oil filter
with oil. Stop the engine, then wait several minutes until
the oil settles.

CAUTION

Дата добавления: 2014-12-23