Rear Shock Absorber SUSPENSION
• Remove the upper tie-rod bolt [A] and nut.
• Remove the mounting bolts [B] and pull off the rear shock absorber [C].
Rear Shock Absorber Installation
• Tighten the mounting bolts.
Torque-Rear Shock Absorber Upper Mounting Nut: 59 N-m (6.0 kgf-m, 43 ft-lb) Rear Shock Absorber Lower Mounting Nut: 98 N-m (10 kgf-m, 72 ft-lb)
• Adjust the rear shock absorber position (see Rear Shock Absorber Adjustment).
Rear Shock Absorber Wear
• Remove the rear shock absorbers (see Rear Shock Absorber Removal).
• Compress each rear shock absorber.
• Visually inspect the following items.
Compression Stroke Oil Leakage Other Damage
• If there is any damage to the rear shock absorber, replace the shock absorbers.
Bushing Wear
• Visually inspect the rubber bushing [A].
• If it shows any signs of damage, replace it.
Rear Shock Absorber Oil Leak Inspection • Refer to the Rear Shock Absorber Oil Leak Inspection in the Periodic Maintenance chapter.
Дата добавления: 2014-12-23 ; Просмотров: 442 ; Нарушение авторских прав? ; Мы поможем в написании вашей работы!
Нам важно ваше мнение! Был ли полезен опубликованный материал? Да | Нет