VVT-i models -

Every 15 000 km or 12 months

Non-VVT-i models -

Pollen filter check

Every 16 000 km or 12 months

VVT-i models -

Every 15 000 km or 12 months

Non-VVT-i models -

Clutch pedal check and adjustment

Undo the small screw and lift the remote control cover

6 Note how it's fitted (positive side upwards) and remove the battery (CR2016) (see illustration).

7 Refitting is a reversal of removal.

1 Press down lightly on the clutch pedal and, with a small steel ruler, measure the distance that it moves freely before the clutch resistance is felt (see illustration). The freeplay should be 1.0 to 5.0 mm. If it isn't proceed as follows:

2 Slacken the locknut on the pedal end of the clutch pushrod (see illustration).

3 Turn the pushrod until the pedal freeplay is correct, then tighten the locknut.

4 After adjusting the freeplay, check the pedal height from the centre of the pedal pad to the footwell metal floor. The distance should be 141.1 to 151.1 mm.

5 If the pedal height is incorrect, slacken the locknut and turn the stop bolt until the height is correct. Tighten the locknut.

Дата добавления: 2014-12-23