A Tap the oil seal into place using a block of wood

Carefully prise out the old seal - take great care not to damage the crankshaft

Lock the flywheel in place using a tool bolted to the engine block

On vehicles equipped with a spacer plate, note the position of the locating pin (arrowed)

16 Main oil seat -renewal

1 Remove the flywheel/driveplate (Sec-tion 15).

2 The seal can be renewed without removing the oil sump or seal retainer. Carefully prise out the old seal with a screwdriver (see illustration). Take great care not to damagethe seal bore or the surface of the crankshaft.

3 Apply multi-purpose grease to the crankshaft seal journal and the lip of the new seal and carefully push the new seal into place. The lip is stiff so carefully work it onto the seal journal of the crankshaft with a smooth object like the

2A•22 Engine in-car repair procedures

end of an extension, then tap into place using a block of wood (see illustrations). Don't rush it or you may damage the seal.

4 The remainder of refitting is the reverse of removal.

17 Engine mountings -check and renewal

1 Engine mountings seldom require attention, but broken or deteriorated mountings should be renewed immediately or the added strain placed on the driveline components may cause damage or wear.

Дата добавления: 2014-12-23