Refitting. 1 This procedure is much easier to perform if the fuel tank is empty

Removal

1 This procedure is much easier to perform if the fuel tank is empty. Some models may have a drain plug for this purpose. If for some reason the drain plug can't be* removed, postpone the job until the tank is empty or syphon the fuel into an approved container using a siphoning kit (available at most automotive parts/accessory stores).

Warning: Do not start the syphoning action by mouth.

2 Remove the fuel filler cap to relieve fuel tank pressure. Relieve the fuel system pressure (see Section 2).

3 Raise the vehicle and place it securely on axle stands (see Jacking and vehicle support).

4 Remove the centre exhaust pipe and the heat insulator from the vehicle (see Section 15).

5 Support the fuel tank with a trolley jack.

Place a sturdy plank between the jack head and the fuel tank to protect the tank.

6 Disconnect the fuel pipe(s), and the fuel filler hose (see illustration). Note: Be sure to plug the hoses to prevent leakage and contamination of the fuel system.

7 Remove the bolts from the fuel tankretaining straps (see illustration).

8 Lower the tank enough to disconnect the electrical connector and earth strap from the fuel pump/fuel gauge sender unit, if you have not already done so.

9 Remove the tank from the vehicle.

10 Refitting is the reverse of removal.

Дата добавления: 2014-12-23