CHK adj. Transmission oil replacement

TRANSMISSION OIL REPLACEMENT

D-10

CHK ADJ

ENGINE PRESSURE INSPECTION

CHECKING ENGINE OIL

1. Stand the scooter on a level surface

b • Drain plug

• Compression spring

• Oil-strainerØ

• O-ring

• Drain the crankcase of its oil

NOTE:

Make sure the scooter is upright when inspecting the oil level

2. Start the engine and let it warm up for a few minu- tes

3. Turn off the engine

4. Check: 3

• Engine oil level 1 2

1 Oil level should be between maximum §a and

a minimum §b marks.

If oil level is below minimum mark, top it up to the proper level.

b

4. Install:

• O-ring Ø

• Compression spring Ø

• Oil-strainerØ

• Drain plug

• Oil filler plug

32 Nm (3,2 m•kg)

NOTE:

Check the O-ring (drain plug). If damaged, replace it

4 with a new one.

5. Fill the crankcase

Oil quantity: 1.4L

6. Check:

• Engine oil level

See section on ENGINE OIL INSPECTION

7. Reset the oil change indicator light:

************************************************************ To reset the oil change indicator light

• Push the “TRIP” Ø button while turning the key to “ON”.

• Release the reset button, and the oil change indi- cator light will go off.

Дата добавления: 2014-12-23