Primary sheave eng. V-belt, clutch and secondary/

1 3 2

PRIMARY SHEAVE ENG

G-2

V-BELT, CLUTCH AND SECONDARY/

PRIMARY SHEAVE ASSEMBLY

5 4 1. Clean:

• Primary sliding sheave face

• Primary fixed sheave face

• Collar

• Weight

• Primary sliding sheave cam face

3. Install:

• Guide pins Ø

1

NOTE:

Remove any excess grease

2. Install in the sliding sheave:

• Weight

• Collar

NOTE:

Apply grease No. (90890-69927) to all of the outside of the weight and install

Apply grease No. (90980-69927) to the inside of the collar

3. Install:

Tracks

Sliding sheave Washer

Fixed sheave Washer/washer Nut

4. Apply:

• Assembly lube (to the guide pin sliding groove

Ø and oil seal Ø New)

5. Install:

• Spring seat

• Secondary sheaf complete

• Compression spring

• Clutch carrier

NOTE:

Temporarily tighten the nut Ø while attaching the clutch spring holder Ø and clutch spring holder arm

and compress the spring

55 Nm (5,5 m•kg)

SECONDARY SHEAVE INSTALLATION

1. Apply:

• Assembly lube (to the secondary sliding sheave

Ø, inner surface, grease nipple groove, and oil

seals)

• Assembly lube (to the bearings, oil seals, and inner surfaces of the secondary fixed sheave Ø

)

2. Install:

• Secondary sliding sheave Ø

	Clutch spring holder: 90890-01337
Clutch spring holder arm: 90890-01464

6. Install: V-belt Ø

Clutch assembly Ø

NOTE:

Install the V-belt with the clutch assembly to the pri- mary sheave side

CAUTION:

Keep grease away from the V-belt, the secondary sheave and the clutch

V-BELT, CLUTCH AND SECONDARY/

7. Install:

• Nut Ø (clutch carrier)

90 Nm (9 m•kg)

NOTE:

Tighten the nut (clutch carrier), using the lock-nut wrench Ø while holding the clutch carrier with the rotor holder Ø

	Rotor holder: 90890-01235
Lock-nut wrench: 90890-01348

8. Install:

• Clutch housing Ø

• Nut Ø (clutch housing)

60 Nm (6,0 m•kg)

NOTE:

Tighten the nut (clutch housing) using the sheave hol- der Ø

Sheave holder: 90890-01701

Дата добавления: 2014-12-23