Ignition system elec

L-6

IGNITION SYSTEM ELEC

+ +

4. Ignition coil resistance
• Disconnect the ignition coil connector from the wireharness. • Check if the primary coil has the specified resistance • Connect the tester (Ω x1) to the ignition coil
	Primary coil resistance 0.19 - 0.27 Ω (20ºC)

5. Pickup coil resistance
• Disconnect the pickup coil coupler from the wire- harness • Connect the pocket tester (Ω x100) to the pickup coil coupler.
Tester (+) lead—( White/Red terminal Tester (-) lead—( White/Blue terminal
• Check the pickup coil has the specified resistance
	Pickup coil resistance 248 - 372 Ω (20ºC)

Tester (+) lead —(

Red/White Terminal Ø

Tester (-) lead —(Orange Terminal Ø

OUT OF SPECIFICATION

Tester (+) lead —(

Spark plug lead Ø

Tester (-) lead —(

Red/White terminal Ø

• Connect the pocket tester (Ω x1K) to the ignition coil. • Check the secondary coil has the specified resistance.
	Secondary coil resistance: 6.3 - 9.5 kΩ (20º)

OUT OF SPECIFICATION

MEETS SPECIFICATION

6. Feeding coil resistance
• Disconnect the feeding coil coupler from the wire- harness • Connect the pocket tester (Ω x1K) to the feeding coil coupler.
Tester (+) lead—( Brown/White terminal Tester (-) lead—( Green/White terminal
• Check that the feeding coil has the specified resis- tance
	Feeding coil resistance 720 - 1,080 Ω (20ºC)

Replace the pickup coil

OUT OF SPECIFICATION

BOTH MEET

SPECIFICATION

+

Replace the ignition coil

7. Main switch

CONTINUITY

Replace the feeding coil

NO CONTINUITY

Refer to “CHECKING SWITCHES” section in CHAP- TER 8

CONTINUIDAD

Replace the main switch

+

Дата добавления: 2014-12-23