Battery. Poor idle speed performance

IGNITION SYSTEM

TROUBLESHOOTING

TRBL SHTG

POOR IDLE SPEED PERFORMANCE

A-2

TRBL SHTG

HEATER SYSTEM ELEC

AUTO CHOKE AND CARBURETTOR

M-11

HEATER SYSTEM ELEC

AUTO CHOKE AND CARBURETTOR

7. Wiring connection

+

5. Heater resistance
• Connect the tester (Ω x 1) to the heater
Tester (+) lead—( Black terminalØ Tester (-) lead—( Black terminalØ
	Automatic starter unit resistance: 16 - 24 Ω (20ºC)

6. Voltage

• Connect the pocket tester (DC20V) to the heater leads

Tester (+) lead—( Green/Red cable Tester (-) lead—( Black table

CORRECT

CORRECT

OUT OF SPECIFICATION

Replace the heater

OUT OF SPECIFICATION

Replace the heater

POOR CONNECTION

• Check the connection of the heater entire system Refer to the “CIRCUIT DIAGRAM” section.

Correct

?
TRBL SHTG

STARTING FAILURE/HARD STARTING

NOTE:

Improperly charged battery Faulty battery

Ignition system Faulty ignition unit Faulty pick up coil

The following troubleshooting does not cover all the possible causes of trouble. It should be helpful,

however, as a guide to troubleshooting. Refer to the relative procedure in this manual for inspection, adjustment and replacement of parts.

STARTING FAILURE/HARD STARTING

Дата добавления: 2014-12-23