Events on the farm from May 2nd 2011 to June 23rd 2011 2 страница

At first, I thought I would manage to create enough picric acid booster material (1,5kg in total) to disregard the addition of AL powder. But considering the fact that I would only manage to produce aprox 200-300g of booster I had no choice than to continue to prepare my 150kg of aluminium powder for addition in the ANFO.

The 150kg of AL came in 4 hermetically sealed drums each containing around 37kg of AL. After reading the "security precautions", however, I was completely freaked out. The drum openings where wielded with a soft metallic substance so it would be difficult to open them without taking extreme risk. The warnings stated; contact with oxygen will risk detonation of the AL powder, contact with metal, concrete and even plastic will significantly increase the chance of static electricity which can cause a detonation. Friction and shock can also cause detonation. Close proximity of oxidizers (gas, diesel) or close proximity to electrical outputs etc. can cause detonation.

I first planned on creating an outdoor mechanism that allowed me to thrust a steel spear like object, by using gravity, creating a 3 cm hole in the top of the drum. However, I ended up taking a regular knife and starting to file down the wielded enclosement, even if it involved high risk. At this point in time I was very concerned for a potential detonation. If the barrel of AL powder was to detonate and I somehow survived, I would probably lose both arms instantly severely. The blast wave/flame would probably cauterize my wounds resulting in an extended and extremely painful death. The most pragmatical approach to solving this potential problem was to place my loaded glock 34 close to the work area. And if I survived a detonation, losing both my arms, I could still fire a round to my head, in order to prevent un-necessary suffering using my toe to trigger.

Eventually, I manage to file open the enclosement. I then considered putting the drum upside down in one of my empty fertilizer bags to prevent the presence of high levels of oxygen.

This method proved to be too exhausting since I had to hold up the 37kg drum with my hands. I ended up with putting a large 3 x 4m plastic sheet on the concrete floor and carefully pouring the AL powder out of the opening. Small clouds of dust began to generate but nothing happened. I carefully continued until the drum was empty rolling the side of the drum in a circular pattern from the center of the AL powder already poured out, until the drum was empty. There were small clouds of AL powder generated but the biggest one was aprox 20 cm in diameter, which settled down after a while. I continued after the small clouds had settled. It's also worth noting that I had closed all the windows of the cellar basement so the humidity was relatively high, while oxygen level was below average.

In any case, this method worked well and I had gathered all the AL powder on the sheet, and thus preparing it for the addition to the ANFO.

Since I had solved the AL problem, I continued the purification of the PA.

Saturday June 18 - Day 48: I woke up at 11.00 and checked my phone. There was an SMS sent 09.30 from Tonje, the owners girlfriend. She said she was ON HER WAY UP to pick up some equipment from the barn!!! Omfg; considering the fact that it's a 2-2,5 hour's drive from the capital she would be here in about half an hour!!! I'm so fucked! She has a large storage room in the back of the barn and she would need to pass all my ANFO bags to get there. I would need 12 hours minimum to relocate the 1,2 tons of ANFO, not to mention de-construct my chemistry rig, fume hood, fan and clean up all the beakers etc spread all around. And the living room is full of yellow stains. It seems I will be left no choice than to use my glock and initiate the evacuation plan!

I called her up. Luckily she hadn't left yet. Thank God! I fed her a story which resulted in us agreeing that she would come on Monday around 20.00. That was a real close one... I spent the rest of the day on purifying another batch of picric acid and relocating 1,2 tons of ANFO bags, storing them in the storage area between the corn silo and another room. I refer to this area as the spider cave or the spider room as there is no lighting there and it is spider webs all over the place. It is a lot of old junk in this room covered with spider webs.

Sunday June 19 - Day 49: I spent much of the day relocating equipment and storing them in the second floor of the house. I covered all the stains on the floor with a rug and covered the living room table with a blanket.

Monday June 20 - Day 50: I spent the day purifying a batch of PA and cleaning all the beakers for storage. I went all over the property to ensure that it would be presentable for today's visit. There was a 37kg pile of aluminium powder on plastic sheet I was unable to move so I covered it up as best as I could. There was also a lot of stains on the work bench in the barn I was unable to do anything about. Then there was the 1,8 tons of ANFO bags and equipment stashed in the spider cave. I covered it up properly but she would easily notice the diesel smell from the bags and uncover it if she went in there... The fate of the whole operation relies on her not noticing. She came to the farm around 20.30. We talked for a while and she said she wanted to stay the night, sleeping in one of the outhouses. It was late in the evening so she wanted to spend the next day getting things from her storage room. I said it was fine and I fed her a story about me having to salvage much of the fertilizer for long term storage, seeing that I would not be able to sow the planned crop (sugar beets) due to too much rocks in the soil. I needed her to be prepared in case she went into the spider room. I just hope she would let me know if she got suspicious the next day so I could take necessary action...

Tuesday June 21 - Day 51: I woke up earlier that day to ensure that she didn't start sniffing around in the house without me being there. At this point in time I figured it was a 50% chance she would get suspicious enough to contact the authorities. I made her some sandwiches and coffee later that day and we chatted for a couple of hours in the living room of the main house. It would seem as she hadn't noticed anything, at least this is how I interpreted her tone, body language and judging from the topics we discussed. She went off later that day, and I figured that I would very shortly get a visit from the authorities if she forwarded her potential suspicions. In any case; there was nothing I could do if it came down to that...

Wednesday June 22 - Day 52: I reinstalled Windows 7 on my PC hoping that it would solve my network problems. It didn't work and I figured it had to be the network card or the phone line itself. I drove to the PC-repair guy in the local town and delivered it. It should be ready by tomorrow. I continued to prepare the chemistry equipment for getting ready to manufacture all DDNP batches. When I was done I completed the last purification batch of the unpurified picric acid and ended up with several liters of PA liquid that had to be chilled. I then drove to the local town and bought three portions of Chinese takeaway. Beef with noodles and fried rice, yummy!. I took an early night as I didn't have any PC.

Thursday June 23 - Day 53: I went to the PC-repair guy in the local town today and he brought very good news. Apparently, it was only the network card that had short circuited so he had replaced it with a new one and I should now finally be able to get online. Once back at the farm I got online and paid the outstanding on the remaining of my 9 credit cards so I wouldn't default on any of the outstanding amounts. When I was about to log into the site of the 10th and last credit card provider my PC went poof and the power went down in the house! Seconds later I heard a large thunder. What the hell, not again!!! And it isn't even raining ffs. I was able to get the PC running again without problems but my DSL-modem short circuited from the lightning strike as an electrical surge went through the phone line again. How is it possible to be this unlucky?! Only two hours after I've had my PC fixed nature comes and rapes me again... Thank god it was only my DSL-modem was destroyed as I have two extra DSL-modems left...;P Nevertheless, my morale took a small dent and I decided to get it back up by watching two episodes or Rome and enjoying nice Chinese takeaway. Later that day set up the fume hood and fan, carrying it down from the second floor, carried down the PA liquid in all the beakers down to the cold cellar, awaiting further chilling in the refrigerator. I then prepared for the first large batch of DDNP, halfway completing it before putting the semi finished product in the fridge.

Friday June 24 - Day 54: I continued on the second stage of the first large DDNP batch today, relocated some of the containers with PA liquid from the cellar to the fridge and updated the log. I couldn't start another badge due to the fact that I only have two 2 liter beakers, very annoying. The worst part about synthesizing formulas with a lacking amount of equipment is the downtime due to waiting for natural heating or chilling of compounds. The whole house is stinking of chems now. DDNP liquid smells like fresh egg fart...<3 And I had to close all the windows to contribute for the liquid to reach room temp faster. All these chemical fumes cant possible be very healthy... I would have probably died from cancer within the next 12 months;P

Saturday June 25 - Day 55: Finished first large batch of the DDNP today. The result, after drying should be approximately 5-12g after purification. As the first half of the PA liquid had been chilled in the fridge for 18 hours I went ahead and funnel filtered out the crystals. As this was supposed to be the best batch of PA I was extremely disappointed to see that there had been minimal precipitation of crystals in the liquid. It should have been 15g of crystals for each liter but it turned out to be 2g per liter. The only rational explanation is that the purification method I am using is significantly flawed. However, considering the fact that I tried putting ice in the beakers and even putting them in the freezer with poor results, I really do not know what has gone wrong. The only alternative reason would be that I used a flawed manufacturing method of PA or that I should have purified the acetylsalicylic acid prior to initiating the PA manufacturing. As I can't really do anything at this point regardless, I would like to think it's the purification method and not the manufacturing method. After I had scraped out the yellow PA crystals and the brown DDNP crystals putting them in plastic boxes and placing them in the cold cellar I went to do some shopping in the northern town. There is a festival and there was a lot of things happening, a faire, various food stands, concerts etc. Since this town has a limited variety of fast food I decided to drive down to the southern town, eat and pick up some Chinese takeaway. There was a relatively hot girl on the restaurant today checking me out. Refined individuals like myself is a rare commodity here so I notice I do get a lot of attention in both the southern and the northern town. It's the way I dress and look. There are mostly unrefined/un-cultivated people living here. I wear mostly the best pieces from my former life, which consists of very expensive brand clothing, LaCoste sweaters, piques etc. People can see from a mile away that I'm not from around here.

Later that day I initiated a new batch of DDNP. As I completed the first phase I noticed one of my two 2L beakers had a large crack in the bottom and drops of liquid was coming out. I was very lucky the beaker hadn't completely cracked open as it would have destroyed my hot plate stirrer for sure. I remember there was a tiny crack that appeared during sulfuric acid purification when I was boiling as a madman outside. Now the beaker is ruined. To be honest; I'm surprised this hasn't happened earlier as I've abused these two beakers excessively. I made a mistake by buying only two 2L beakers instead of 4-5. That mistake has cost me at least 3-4 days in total. The loss of this beaker poses a significant problem as I relied on these two beakers to take me through the whole manufacturing process. If I go down a size and use the last 1L beaker I have left (I managed to break one during washing after boiling all the sulfuric acid outside. it will take me an extra day to complete the DDNP manufacturing. I'll see what I'll do later today. While waiting for the liquid to reach 4C in the fridge I went to train for the second time since I came to the farm. I used two backpacks, one in front and one on the back, with a total weight of 27kg. In addition I filled a container with 5L of liquid and held it with my left and then right arm partly stretched out in front of me. I took a 20 minute walk with these weights and it was a great exercise. As always I take protein powder + creatine before and after the exercise to maximize the outcome. I'm almost out of my steroid/winstrol tabs now as this project has taken significantly longer than expected. I only have a few days left worth of tabs so I have to sort this out in the coming days. I was thinking of traveling back to the capital and restock after I complete the DDNP production. Damn, the most annoying thing about synthesizing DDNP is that you have to wait 12 hours for the liquid to reach 4C in the fridge, later on you have to wait 3-5 hours for the compound to chill from boiling to room temperature and at the last phase you need to wait 12-18 hours for the liquid to go from 4C to room temperature. In other words, one batch of DDNP takes approximately 40 hours. If I had 6 x 2L beakers instead of 2, it would allow me to complete 3 batches in less than 2 days (45 hours), instead of having to spend more than 5 days (120 hours) due to lack equipment...

Sunday June 26 - Day 56: Completed the second and third phase of the second batch of DDNP. I moved the last batch of PA liquid from the cellar to the fridge. Updating log.

I am noticing increased pressure from my friends and family to come visit me at the farm. I am countering by saying I will be done with this seasons work within x weeks, and that they are more than welcome to visit me then. This has worked for 2 months now, but this pressure will increase progressively as I delay.

Monday June 27 - Day 57: Filtered out the pure PA crystals from the last batch of PA water after chilling it in the fridge for 12+ hours. Cleaned out all the beakers. Completed the last stage of the second batch of DDNP. Initiated the first stage of the last batch of DDNP. As I have now re-initiated my training I did a workout later that evening.

Tuesday June 28 - Day 58: Continued on the last DDNP batch. Went to the northern town to do some errands. Updating log. Later when searching online for efficient DDNP purification methods; I just learned that when acidifying the sodium picramate solution during DDNP manufacture, H2S and SO2 is released, which is potentially deadly. Crap, and I've been inhaling that diarrhea gas for three days now! I didn't even bother turning on the fan in the fume hood on a couple of occasions during that stage...

Wednesday June 29 - Day 59: Completed last batch of DDNP. I was now facing the task of purifying it, but was uncertain how to approach this. Was it necessary to purify it at all? How much would the VOD (velocity of detonation) suffer from not purifying it? Would it cut the VOD in half? My whole operation depended on the VOD from my primary being able to detonate the secondary explosive. After a few hours of research online I found that mixing the unpurified DDNP in acetone, then filtering it to another beaker with a lab filter or alternatively two coffee filters and then boiling the acetone away over a hot water bath, would be the optimal approach as the precipitation method with ice cold water method apparently didn't work for those that tried it. The problem now was that I only had one conical flask and one porcelain boiling dish (100ml) suitable for this type of purification method. I feared that this method would take a very long time with the lack of equipment. As I didn't have much choice I began the purification process. I managed to purify 1/3 of a batch (I had three batches) in 3 hours. As I got the hang of it I managed to reduce the time spent to 2 hours. Watching Spartacus - Blood & Sand, a brilliant series:-). It's my favourite one, in addition to Rome, Battlestar Galactica, Caprica and Stargate Universe!<3. The Shield, Dexter, Sleeper Cell, Vampire Diaries and True Blood are good as well. All the series adhere to the multiculti ideology but such is life for the time being.

Thursday June 30 - Day 60: This house is infested with beetles. Just now I was about to reach for a chocolate in my goodie bag and a beetle had crawled in, ffs. And an hour ago, when I was putting on my nitril gloves to do another DDNP purification cycle, something was crawling in one of the fingers:-(Needless to say, I freaked out... After that I started killing every little insect in view. And I'm up to 18 just in the last hour... Parts of this house is from 1750 so it's probably several bug colonies in the walls.

I haven't slept at all since yesterday, trying to complete the last DDNP purification. That will complete the chemistry phase and I can move on to the last ANFO -->ANALFO phase. Addition of aluminium and micro balloons to the 1,8 tons of ANFO. But before I start the last phase, I need to travel to the capital for resupply.

When I went inside the barn yesterday, a window had loosened and laid smashed on the floor. There are several signs of noticeable wear outside as well. Three large trees has blown down and two panels on the side of the barn has blown off. Anyone seeing this must think I don't give a damn... I haven't had the time or energy to sort that out yet. Perhaps when I'm done with the chemistry phase...

As I've now completed the purification process of 25g of DDNP (I will save an additional batch of unpurified 12g as backup), it's time for me to wrap up the chemistry phase. I do have 50L of impure nitro methane (30% RC fuel) in the barn but it's a bit tricky to purify it. I will see what I can do about it tonight. If I can't find an appropriate purification method Ill just skip the NM altogether. In any case; I can now dismantle the lab, again...

I talked to my friend, Peter, after missing one of his inc. calls earlier. He is visiting his girlfriend in a nearby town and wanted to stop by the farm... I fed him a story about me going to the capital and it worked, for now... However, it would not be suitable to receive visitors here as anyone stopping by would eventually understand that things are not what they seemed. I have to be careful not to answer his calls while he is so close to the farm. Manipulation and deceit can quickly turn around and act in your disfavour, if you are not careful. I guess I have been somewhat reckless in regards to maintaining my social network. Choosing complete isolation and asocial behaviour, in phases like these, would probably be a more pragmatical approach for ensuring secrecy. However, complete isolation and asocial behaviour can also defeat the whole purpose if you end up losing the love for the people you have sworn to protect. Because, why would you bless your people with the ultimate gift of love if every single person hates you?

Friday July 1 - Day 61: Ok, I have now completely dismantled the lab and stored all the equipment in boxes on the second floor. Removed all the glass from the broken window near the work bench in the barn and fastened a plastic sheet with duct tape.

It is now 8 days since I was forced to drastically reduce my winstrol intake and 2 days since I ran out of both winstrol and DBOL tabs. I'm noticing slight symptoms of withdrawal resulting in loss of muscle mass (down 3kg from my peak at 96kg). I'm also low on no-Xplode and protein powder. I need to restock in the capital. Damn, Peter is visiting his girlfriends sister in central Norway and Marius is unavailable due to work.

Saturday July 2 - Day 62: Going over the travel route for both plan A and B for the upcoming event, familiarizing myself with the driving routes and plotting in destinations in my Garmin GPS. I went to the gym and did a really hard workout. I was surprised I managed to lift as more or less as much as I could when I was at my best, in late April. However, I had to cancel the program half way because I was getting dizzy. Damn, just too long since I properly worked out.

Nice, I have enough winstrol for 20 more days (10mg x 100 tabs). I should have ended this cycle after 6-7 weeks though and I am now on my 9th week... Not healthy at all and I'm concerned about my liver values.

I took my mom out to dinner this evening, then hooked up with Axel for a coffee afterwards, discussing politics. Oh, how I missed these discussions...:-) Went back to the farm late in the evening.

Sunday July 3 - Day 63: Raining again... I planned to extract the armour cache today (the Pelican 1620 case I buried July 2010) or initiate evaporation purification of my 50ish liters of nitro methane, RC fuel. But I will have to wait for the first sunny day. Will have to begin the final phase shortly, the mixing of AL and micro balloons in the ANFO. I think I'll take a day off prior to the upcoming phase shift and just download some new trance tunes. Lange feat. Sarah Howells (amazing voice) has three songs I haven't yet downloaded; Lange Ft. Sarah Howells - Fireworks (Club Mix), Lange Ft. Sarah Howells - Out of the Sky (Original Mix) and Lange feat. Sarah Howells "Let It All Out" (Lange)

Noticing that the testo withdrawal is contributing to increased aggressiveness. As I'm now continuing with 50mg it will most likely pass. I wish it would be possible to somehow manipulate this effect to my advantage later on when it is needed. Because the state seems to very efficiently suppress fear. I wonder if it is possible to acquire specialized "aggressiveness" pills on the market. It would probably be extremely useful in select military operations, especially when combined with steroids and ECA stack...! It would turn you into a superhuman one-man-army for 2 hours!<3

Monday July 4 - Day 64: Updated log for a few hours. I then began the preparations for a trip to extract the armour cache, I had dug down a year ago in Juli 2010. I am really concerned that someone has somehow found the cache. It would be a significant setback if that was to be the case. Or what if moisture had somehow penetrated the pelican case I used. It would be possible considering the fact that the area where the cache is located has permafrost during winter.

I did not look forward to this extraction trip as I had nightmarish memories from digging down the case in the first place, 12 months ago. The location is in a mosquito infested area and combined with the labour intensive nature of this sub mission, I remember it as a painfully exhausting and dreadful experience.

After packing the necessary supplies for the trip, I went by a hunting store and purchased upgraded ammunition (200 SP rounds, costing 300 euro) for my.223 Ruger Mini 14.

After a few hours driving I reached the destination. It took me around 30 minutes to locate the grave as I had camouflaged the dig sight very thoroughly, covering it with tree stumps etc. As expected, there was a big welcoming party waiting for me... Oh my, apparently, due to their great feast a year ago the mosquito population had seemed to triple for that particular spot... To counter this, I wore a raincoat which served to protect me from insect bites. However, labouring intensively in an air tight raincoat is extremely painful, even dangerous. I generated at least 2L of sweat by the time I was done so I had to constantly hydrate from my camel back. After two and a half painful hours I had extracted the armour crate and its content. Considering the fact that I do not have a secondary pistol, I disregarded filling up the crate with survival gear which was the original plan.

As for the content of the crate, it was in perfect condition. Not a single drop of liquid had penetrated the crate and no moisture had entered the rubber seal whatsoever. This means that one can bury electronic devices as well without it being affected at all!!!:-) These Pelican cases are simply amazing for this purpose. I'm sure you can bury it for several years, even below permafrost, perhaps up to 10 years, before the rubber seal rots away. I'm very impressed!

I arrived at the farm late in the evening. My neighbour had started harvesting my crops, as was the agreement made earlier.

Tuesday July 5 - Day 65: Spent a few hours on ammunition administration. Replaced most of the.223 HP (hollow point) rounds with SP rounds. According to my research; HP rounds for.223 tend, 80-90% of the time, to not mushroom as intended, which defeats much of their purpose. SP (soft point) on the other hand, at least for the.223 caliber, are more suitable for the purpose of inflicting maximum damage to vermin. I did other practical tasks this day including colouring some of my equipment black with permanent markers of various sizes. Emptied the armour case. Lol, I forgot I had put a batch of DBOL, winstrol and ECA stack in the case:-). Nice, now I don't have to make more ECA stack tabs from scratch.

I realize that If I am apprehended with all this equipment I will have serious problems trying to explain its intended usage...

Wednesday July 6 - Day 66: Changed the tertiary charge setup, and planned the last manufacturing phase accordingly in regards to ANALFO mixing. I will be creating 19 x 50kg bags containing 43kg of ANFO, 6,45kg of AL (15%) and 1,2kg of micro balloons (2,7%). After that I will create 13 x 50kg bags containing 46kg of ANFO, 2,3kg of AL (5%) and 1,2kg of MB (2-3%). Re-located most of the ANFO from the spider cave to the processing bench.

Thursday July 7 - Day 67: Re-distributed the micro balloons from the 16kg bags into 13 individual plastic bags each containing 1,2kg. Prepared 35 such bags - equivalent to 2,5% of the 50kg fertilizer bags. Started to do the same with the aluminium powder, re-distributing them from the 36kg metal drums to individual plastic bags each containing 6kg. Finished 6 such bags, but after further consideration I will use 5kg instead of 6. I realize now that many of the warnings concerning aluminum powder is nothing more than scare mongering, probably to limit the legal liability of the producer. It is much safer to handle than people might expect, even in the micro fine 400 mesh (63 microns) powder I have. I have generated multiple clouds of aluminium and nothing has gone wrong. Just be very careful and you'll be fine.

As I was working on weighing the microballoons on my gram weight, using my 3M full face mask, I noticed an itch on my nose. That's when I saw a large black beetle on the inside of the mask...FFS. Freaked me out. I usually check for insects every time I wear gloves or the mask, but I must have missed it this time.

The neighbour is still harvesting my field outside. He originally told me it would only take 6 hours total but it's the third day now... As long as he is lurking around on my property he is going to slow me down significantly as I have to take extra security precautions. Not to mention I have to delay the nitro methane evaporation outside until he's done. I could probably have done it inside, but considering the fact that methane forms potentially explosive/flammable vapours I'm not readily keen on evaporating the RC fuel inside.

Friday July 8 - Day 68: I opened the remaining two aluminium drums and re-distributed the content in plastic bags (regular shopping bags). I then completed to weigh the content of the bags on a gram weight resulting in 18 bags a 5kg (10-12%), 10 bags a 2,35kg (5-6%) and finally two bags a 6,5 kg for the inner drum charge.

Saturday July 9 - Day 69: I started mixing the ANFO with the micro balloons and the aluminium powder. I completed 2 bags a 50kg. It was very labour intensive, much more than I imagined as I had to first open the ANFO bags, then distribute 12,5kg of the content into a plastic 50L masonry bucket. I then poured the content into a plastic 100L masonry bucket. As much of the ANFO was packed into hard lumps I had to crush them with a rubber hammer. I then started to crush the smaller lumps with my hands until the ANFO was powdered. I then poured 25% of the micro balloon bag inside the bucket and mixed it (it will create clouds of micro balloon dust as you mix it), following by doing the same with the aluminium powder. Clouds of aluminum powder will be generated and the whole area will be covered in AL dust including your clothing, your hair, and every item you might have in a 5m radius. This is problematic as you end up spread AL dust everywhere as you walk around. I ended up assigning "mixing clothing and shoes" which I took off every time I left the room. It's the only thing you can do to prevent spreading it somewhat but you will still get stained by AL. I considered using a hazmat suit or my different kind of lightweight dust suit but the problem is that it gets too hot when combined with intensive labour like mixing.

Дата добавления: 2015-05-31