Warning

Fuel Tank

Fuel Tank Installation

• Read the WARNING in the Fuel Tank Removal section.

• Check the rubber dampers [A] on the frame and the one pasted under the fuel tank.

• If the dampers are damaged or deteriorated, replace them.

• Route the hoses correctly (see Cable, Wire, and Hose Routing in the Appendix chapter).

• Be sure the hoses are clamped to the fuel tap to prevent leakage.

Fuel Tap Removal

Gasoline is extremely flammable and can be ex­plosive under certain conditions. Turn the ignition switch OFF. Do not smoke. Make sure the area is well-ventilated and free from any source of flame or sparks; this includes any appliance with a pilot light.

• Remove the fuel tank (see Fuel Tank Removal). Remove the bolts [A] and take out the fuel tap [B].

Fuel Tap Installation

• Install the fuel tap with a specified torque.

Torque - Fuel Tap Mounting Bolts: 5.0 N·m (0.51 kgf·m, 44 in·lb)

• Be sure to clamp the fuel hose to the tap to prevent leaks.

• Install the fuel tank (see Fuel Tank Installation)

Fuel Tank and Tap Cleaning

• Remove the fuel tank and drain it.

• Pour some high flash-point solvent into the fuel tank and shake the tank to remove dirt and fuel deposits.

Clean the tank in a well-ventilated area, and take care that there are no sparks or flame anywhere near the working area; this includes any appliance with a pilot light. Because of the danger of highly flammable liquids, do not use gasoline or low flash -point solvents to clean the tank.

Топливная система 3-23

Дата добавления: 2014-12-23