CAUTION. Camshaft, Camshaft Chain

Camshaft, Camshaft Chain

ENGINE TOP END

Camshaft Removal

• Remove the cylinder head cover (see Cylinder Head Cover Removal).

•_○PUossinitgioan twh reencrcahnkosnhtahfet actr#a2nkpsihstaofnt rToDtaCti.on bolt turn the

crankshaft clockwise until the "C" mark line [A] on the rotor is aligned with the notch [B] in the edge of the upper hole in the alternator cover.

• Remove:

Camshaft Chain Tensioner (see Camshaft Chain Ten-sioner Removal) Cylinder Head Oil Pipes [A] Top Chain Guide [B] Camshaft Caps [C] Camshafts [D]

• Stuff a clean cloth into the chain tunnel to keep any parts
from dropping into the crankcase.

The crankshaft may be turned while the camshafts are removed. Always pull the chain taut while turn­ing the crankshaft. This avoids kinking the chain on the lower (crankshaft) sprocket. A kinked chain could damage both the chain and the sprocket.

Camshaft Installation

• Apply molybdenum disulfide oil to all cam parts and jour­nals.

• If the camshaft(s) and/or cylinder head are replaced with new ones, apply a thin coat of a molybdenum disulfide oil on the new cam part surfaces.

Дата добавления: 2014-12-23