Do not mix different types of ethylene glycol anti- freeze containing corrosion inhibitors for alumi- nium engines

Do not use water containing impurities or oil Take care that no coolant splashes onto painted surfaces. If it does, wash it off immediately with water

Hard and salt-water damage engine parts. Use only distilled water if soft water is not available If you use tap water ensure that it is soft

Quickly force them to vomit it up, and summon medical help

Quickly wash it away with water and then with soap and water

Thoroughly wash your eyes with water and seek medical help

• If coolant splashes onto your clothes:

• If someone swallows coolant:

CAUTION:

9. Tighten:

• Screw (thermostat bleed)

• Fill with coolant up to the level indicated

10. Install:

• Radiator cap

• Breathing hose

11. Start the engine and let it warm up for several minutes

12. Turn off the engine and check the level

See section on CHECKING COOLANT LEVEL

NOTE:

Wait a few minutes until the coolant settles before checking the coolant level

13. Install:

• Upper front panel

Lower and side leg-shield panel

Дата добавления: 2014-12-23