Connect the positive lead first and then the nega- tive lead

KEEP BATTERIES AND ELECTROLYTE OUT OF THE REACH OF CHILDREN

Keep batteries away from fire, sparks or open fla- mes (welding equipment, lighted cigarettes, etc) DO NOT SMOKE when charging or handling bat- teries

1. Disconnect:

• Battery

2. Remove:

• Battery

3. Check:

• Battery condition

************************************************************ Procedure for checking the condition of a battery:

• Connect a digital voltmeter to the battery terminals.

4. Check:

• Battery terminals

If the terminal is dirty, clean with a wire brush If the connection is poor, correct it

NOTE:

After cleaning the terminals grease them lightly

5. Install:

• Battery

6. Connect:

• Battery cables

CAUTION:

7.Install:

• Battery case cover

CHECK THE FUSE CAUTION:

To prevent short-circuits, always turn off the main switch when checking or replacing the fuse.

1. Remove:

• Battery case cover

2. Check:

• Fuse

************************************************************ Steps to take:

• Connect the pocket tester to the fuse and check for continuity

Tester (+) lead – Battery (+) terminal

Tester (-) lead – Battery (-) terminal

NOTE:

Set the tester selector to “Ω x 1” position

Pocket tester: 90890-03112

• If the tester indicates, replace the fuse

************************************************************

CHECK THE FUSE/ HEADLIGHT BEAM ADJUSTMENT

Дата добавления: 2014-12-23