Engine overhaul eng

F-2

ENGINE OVERHAUL ENG

Never use a fuse with a rating other than that spe- cified. Never use other materials in place of a fuse. An improper fuse may cause extensive damage to the electrical system, lighting and igni- tion system malfunction, and possibly a fire.

E-5

CHK ADJ

3. Replace:

• Blown fuses

************************************************************ Replacement procedure

• Turn off the main switch

• Install a new fuse with the proper current rating

• Turn on switches to verify operation of related elec- trical devices

• If the fuse blows again, check the electrical circuit

s WARNING:

4. Install:

• Battery case cover

HEADLIGHT BEAM ADJUSTMENT

1. Adjust:

• Headlight beam (vertically) Turn the adjuster Ø in or out

Turning in, Headlight beam dips Turning out, Headlight beam rises

ENG

Order	Job name/part name	Quantity	Remarks
	Carburettor gasoline hose		When reassembling reverse the order followed when stripping-down.

ENGINE OVERHAUL

REMOVING THE ENGINE

WIRE HARNESS AND CABLE

Order	Job name/part name	Quantity	Remarks
	Wire-hamess and cable removal		Remove the parts in order
Compartment
Seat
Drain the coolant
	See section on COOLANT REMOVAL
	in Chapter 3
Spark plug cap
	Thermo-unitlead
	Starter coil/pick up lead	1/1
	Starting motor lead
	Earth lead
	Accelerator cable

Дата добавления: 2014-12-23