КАТЕГОРИИ: Архитектура-(3434)Астрономия-(809)Биология-(7483)Биотехнологии-(1457)Военное дело-(14632)Высокие технологии-(1363)География-(913)Геология-(1438)Государство-(451)Демография-(1065)Дом-(47672)Журналистика и СМИ-(912)Изобретательство-(14524)Иностранные языки-(4268)Информатика-(17799)Искусство-(1338)История-(13644)Компьютеры-(11121)Косметика-(55)Кулинария-(373)Культура-(8427)Лингвистика-(374)Литература-(1642)Маркетинг-(23702)Математика-(16968)Машиностроение-(1700)Медицина-(12668)Менеджмент-(24684)Механика-(15423)Науковедение-(506)Образование-(11852)Охрана труда-(3308)Педагогика-(5571)Полиграфия-(1312)Политика-(7869)Право-(5454)Приборостроение-(1369)Программирование-(2801)Производство-(97182)Промышленность-(8706)Психология-(18388)Религия-(3217)Связь-(10668)Сельское хозяйство-(299)Социология-(6455)Спорт-(42831)Строительство-(4793)Торговля-(5050)Транспорт-(2929)Туризм-(1568)Физика-(3942)Философия-(17015)Финансы-(26596)Химия-(22929)Экология-(12095)Экономика-(9961)Электроника-(8441)Электротехника-(4623)Энергетика-(12629)Юриспруденция-(1492)Ядерная техника-(1748) |
Mm below the float chamber line
Gasoline (fuel) and its vapours are highly flamma- ble and explosive. Keep away from sparks ciga- rettes, flames or any other sources of ignition. FUEL LEVEL ADJUSTMENT CARBURETTOR CARB I-4 CARBURETTOR CARB
Float height 7,5mm
Out of specification—(Replace
************************************************************
5. Install: 1 • Diaphragm Ø
a NOTE: b Align the diaphragm tab (a) with the carburettor slot (b).
6. Install: • Compressor spring Ø • Lid Ø
s WARNING
1. Measure: • Fuel level (a) Out of specification —(Adjust Fuel level: ************************************************************ Measurement and adjustment steps: • Place the scooter on a level surface • Place a hydraulic jack beneath the engine so that the carburettor is in a vertical position. •• Connect the fuel level gauge Ø to the drainage tube Ø. Fuel level gauge: 90890-01312
• Loosen the drain screw Ø. • Hold the gauge vertically up to the tank. • Measure the fuel level (a) with the gauge. • If the level is incorrect, adjust. • Remove the carburettor. • Inspect the valve seat and the needle valve. • If both are worn, replace. • If both are in order, adjust the height, doubling the floater pin. • Check the height again. ************************************************************
AUTOMATIC STARTER INSPECTION (Ambient temperature below 45ºC) 1. Remove: • Carburettor
2. Inspect: • Auto choke assembly Connect a tube of 5mm-diameter Ø to the choke Ø, and blow through it. Possible, In good condition Impossible, Replace auto choke unit. 3. Inspect: • Auto choke assembly (with battery)
************************************************************ Inspection and adjustment steps: • Connect the auto choke unit leads to the 12V battery for 5 minutes. Black terminal —(12 V battery (-) Ø Red terminal —(12V battery (+) Ø Connect a 5mm-tube to the starter Ø and blow with the mouth. Possible, Replace auto choke unit. Impossible, Good condition. ************************************************************
Дата добавления: 2014-12-23; Просмотров: 331; Нарушение авторских прав?; Мы поможем в написании вашей работы! Нам важно ваше мнение! Был ли полезен опубликованный материал? Да | Нет |