Wheel static balance adjustment

FRONT WHEEL AND BRAKE DISC CHAS

J-4

FRONT WHEEL AND BRAKE DISC CHAS

Do not strike the inner race of balls of the bearing. Contact should be made only with the outer race.

Mm

Out of specification —(replace

2. Measure:

• Brake disc thickness

	Brake disc thickness: 4.5 mm
Minimum thickness: 4 mm

Out of specification —(replace

FRONT WHEEL ASSEMBLY

1. Install:

• Bearing Ø

• Spacer Ø

• Bearing Ø

• Oil seal

NOTE:

Apply the lithium soap base grease on the bearing and oil seal lip when installing.

Use a socket that matches the outside diameter of the race of the bearing.

Always use a new oil seal.

Install the oil seal with its manufacturer’s marks or numbers facing outward.

CAUTION:

2. Install:

• Brake disc Ø

1 NOTE:

23 Nm (2.3 m•kg)

NOTE:

After replacing the tyre and/or the rim, the wheel sta-

Tighten the bolts (brake disc) in stages using a criss- cross pattern

tic balance should be adjusted.

Adjust the front wheel static balance with the brake disc installed

Дата добавления: 2014-12-23