CAUTION. Rear Brake Light Timing Adjustment

Rear Brake Light Timing Adjustment

Rear Brake Light Timing Inspection

Front Brake Light Timing Inspection

Maintenance Procedure

Brake Light Switch Operation Inspection

• Turn on the ignition switch.

• The brake light should go on when the brake lever is ap­plied or after the tip of brake lever moves about 10 mm (0.39 in.) [A].

• Turn on the ignition switch.

• Check the operation of the rear brake light switch by de­pressing the brake pedal. The brake light should go on as specified.

• If it does not, adjust the brake light timing.

Brake Light Timing Standard: On after about 15 mm (0.59 in.) pedal travel [A]

Brake light timing is adjusted by changing the position of the rear brake light switch [A].

• Adjust the position of the switch so that the brake light
goes on after the specified pedal travel by turning the ad­
justing nut [B].

[C] Lights sooner.

[D] Lights later.

To avoid damaging the electrical connections in­side the switch, be sure that the switch body does not turn during adjustment.

Дата добавления: 2014-12-23