ОThe cables and wiring will have some effect on the motion of the fork which must be taken into account. Be sure the wires and cables are properly routed.
OThe bearings must be in good condition and properly lubricated in order for any test to be valid.
•Adjust the steering if necessary.
• Remove:
Handlebar (see Handlebar Removal in the Steering chapter)
Side Cover (see Side Cover Removal in the Frame chapter)
Seat (see Seat Removal in the Frame chapter) Fuel Tank (see Fuel Tank Removal in the Fuel System chapter)
Периодический ремонт 2-33
• Loosen:
Both Fork Lower Clamp Bolts [A]. Steering Stem Head Nut [B].
• Adjust the steering.
• If the steering is too tight, loosen the stem nut [A] a fraction of a turn.
• If the steering is too loose, tighten the stem nut a fraction of a turn.
Special Tool - Steering Stem Nut Wrench: 57001-1100 [B].
Нам важно ваше мнение! Был ли полезен опубликованный материал? Да | Нет
studopedia.su - Студопедия (2013 - 2025) год. Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав!Последнее добавление