Maintenance Procedure. • Turn the ignition switch to P (Park) position

Third Step

Second Step

• Turn the ignition switch to P (Park) position.

• The city light and taillight should go on.

• If the light does not go on, inspect or replace the following item.

Ignition Switch (see Switch Inspection in the Electrical System chapter)

• Turn on the turn signal switch [A] (left or right position).

• The left or right turn signal lights [B] (front and rear) ac­cording to the switch position should flash.

• The turn signal indicator LED [C] in the meter unit should flash.

• If the each light does not flash, inspect or replace the following item.

Turn Signal Light Bulb (see Lighting System in the Elec­trical System chapter)

Meter Unit for Turn Signal Light Indicator LED (see Meter Unit in the Electrical System chapter) Turn Signal Relay Fuse 10 A (see Fuses in the Electrical System chapter)

Turn Signal Switch (see Lighting System in the Electrical System chapter)

Turn Signal Relay (see Lighting System in the Electrical System chapter)

Harness (see Wiring Inspection in Electrical System chapter)

• Push the turn signal switch.

• The turn signal lights and indicator LED should go off.

• If the light does not go off, inspect or replace the following item.

Turn Signal Switch (see Lighting System in the Electrical System chapter)

Turn Signal Relay (see Lighting System in the Electrical System chapter)

2-36 Периодический ремонт

Дата добавления: 2014-12-23