Clutch Lever and Cable

CLUTCH

Special Tool and Sealant

CLUTCH 6-7

Specifications

CLUTCH

Item	Standard	Service Limit
Clutch Lever Position	Non-adjustable	-----------------------
Clutch Lever Free Play	2 ∼ 3 mm (0.08 ∼ 0.12 in.)	-----------------------
Clutch Friction Plate Thickness Friction and Steel Plate Warp Clutch Spring Free Length	2.9 ∼ 3.1 mm (0.114 ∼ 0.122 in.) 0.2 mm (0.008 in.) or less 34.2 mm (1.346 in.)	2.75 mm (0.1082 in.) 0.3 mm (0.012 in.) 33.1 mm (1.303 in.)

Clutch Holder: 57001-1243

Kawasaki Bond (Silicone Sealant): 56019-120

Clutch Lever Position Adjustment

The adjuster has 5 position so that the clutch lever posi­tion can be adjusted to suit the operator’s hand. • Push the lever forward and turn the adjuster [A] to align

the number with the arrow mark [B] on the lever holder. ○The distance from the grip to the released lever is mini­mum at number 5 and maximum at number 1.

Clutch Cable Inspection

• Refer to the Clutch Cable Inspection in the Periodic Main­
tenance chapter.

Clutch Lever Installation

• Install the clutch lever so that the mating surface [A] of
the lever holder is aligned with the punch mark [B] on the
handlebar.

Cable Lubrication

Whenever the clutch cable is removed, lubricate the clutch cable as follows. • Apply a thin coating of grease to the cable upper and

lower ends.

Lubricate the cable with a penetrating rust inhibitor.

Дата добавления: 2014-12-23