Студопедия

КАТЕГОРИИ:


Архитектура-(3434)Астрономия-(809)Биология-(7483)Биотехнологии-(1457)Военное дело-(14632)Высокие технологии-(1363)География-(913)Геология-(1438)Государство-(451)Демография-(1065)Дом-(47672)Журналистика и СМИ-(912)Изобретательство-(14524)Иностранные языки-(4268)Информатика-(17799)Искусство-(1338)История-(13644)Компьютеры-(11121)Косметика-(55)Кулинария-(373)Культура-(8427)Лингвистика-(374)Литература-(1642)Маркетинг-(23702)Математика-(16968)Машиностроение-(1700)Медицина-(12668)Менеджмент-(24684)Механика-(15423)Науковедение-(506)Образование-(11852)Охрана труда-(3308)Педагогика-(5571)Полиграфия-(1312)Политика-(7869)Право-(5454)Приборостроение-(1369)Программирование-(2801)Производство-(97182)Промышленность-(8706)Психология-(18388)Религия-(3217)Связь-(10668)Сельское хозяйство-(299)Социология-(6455)Спорт-(42831)Строительство-(4793)Торговля-(5050)Транспорт-(2929)Туризм-(1568)Физика-(3942)Философия-(17015)Финансы-(26596)Химия-(22929)Экология-(12095)Экономика-(9961)Электроника-(8441)Электротехника-(4623)Энергетика-(12629)Юриспруденция-(1492)Ядерная техника-(1748)

Renewal - VVT-i engines. Testing - VVT-i engines




Testing - VVT-i engines

Renewal - 1.3 litre 4E-FE engines

Testing - 1.3 litre 4E-FE engines

 

85 Disconnect the wiring plug from the sensor, and connect the leads of an ohmmeter to the sensor terminals.

 

86 Measure the resistance of the sensor and compare the readings obtained with those given in the Specifications at the start of this Chapter.

 

 

87 Disconnect the sensor wiring plug, and unclip it from the bracket adjacent to the oil level dipstick (see illustration).

 

88 Remove the auxiliary drivebelt(s) as described in Chapter 1.

 

89 Remove the crankshaft pulley and timing belt covers as described in Chapter 2A.

 

90 Undo the bolt and remove the sensor from the mounting bracket (see illustration).

 

91 Refitting is a reversal of removal. Tighten the sensor bolt to the specified torque.

 

 

92 Remove the alternator as described in Chapter 5A.

 

93 The sensor is located adjacent to the crankshaft pulley at the front of the engine. Trace the wiring back from the sensor and disconnect the wiring plug (see illustration).

 

94 Connect the leads of an ohmmeter to the sensor terminals, and measure the resistance


start of this Chapter.

 

 

95 Proceed as described in paragraphs 92 and 93

 

96 Undo the bolt securing the sensor wiring loom retaining bracket to the engine block.

 

97 Undo the retaining bolt and withdraw the sensor from position (see illustration). Discard the sensor O-ring seal, a new one must be fitted.

 

98 Insert the sensor into position, with a new O-ring seal.

 

99 Tighten the retaining bolt to the specified torque, and reconnect the wiring plug.

 




Поделиться с друзьями:


Дата добавления: 2014-12-23; Просмотров: 381; Нарушение авторских прав?; Мы поможем в написании вашей работы!


Нам важно ваше мнение! Был ли полезен опубликованный материал? Да | Нет



studopedia.su - Студопедия (2013 - 2024) год. Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав! Последнее добавление




Генерация страницы за: 0.012 сек.