Removal. Undo the two bolts (arrowed) and remove the hose bracket

Undo the two bolts (arrowed) and remove the hose bracket

19 Road test the vehicle and check for proper operation of all accessories.

14 Exhaust manifold -removal and refitting

Warning: The engine must he completely cool before beginning this procedure.

1 Remove the upper heat shield from the manifold (see illustration). Note: There may also be a lower heat shield, but this is attached to the manifold from underneath and does not need to be removed.

2 Apply penetrating oil to the exhaust manifold mounting nuts/bolts, and the nuts/bolts retaining the exhaust pipe to the manifold. After the nuts/bolts have soaked, remove the

12 Clean the mating surfaces of the intake manifold and the cylinder head mounting surface with brake cleaner or a suitable solvent. If the gasket shows signs of leaking, have the manifold checked for warpage at an automotive machine workshop and resurfaced if necessary.

13 On 1.6 litre 4A-FE engines, the manifold is a two-piece design, and a new gasket set

13.10 Release the clamps and disconnect	13.11 Undo the nuts and bolts (arrowed)
the servo vacuum hose (right arrow) and
the PCV hose (left arrow)	and remove the intake manifold

4A•14 Fuel and exhaust systems

Дата добавления: 2014-12-23