Adjustment Procedure

Inspections after Cleaning

Air Filter

Note!

If replacing pads, we suggest to contact with your dealer to replace the pads

Clean the air filter every time, after the vehicle is used cross-country.Air filter is under the saddle, consisting of plastics-case, filter element and cover. To clean it, undo the saddle and cover of plastic-case, the take out the sponge and wash it.

Note!

If filter element is very dirty, wash it in shampoo,then make sure place dry sponge in the plastics-case.

After cleaning the motorcycle, it is good practice to:

rear fork

Lubricate the articulated joints A on the rear suspension.

Clean carefully and dry the chain gear-pinion assembly and then apply grease thoroughly in to keep the parts in good condition as long as possible.

The rear shock absorber is equipped with adjusters which allow the vehicle geometry to be adapted to different conditions.

Adjuster B, located near the lower shock absorber mount,to adjust the hydraulic damping during the compression phase.

Turning knobs B clockwise increases the damping action; conversely, turning them anticlockwise decreases it

Note!

In the event of any malfunction, contact our authorized customer service network.

Adjusting parts is very important for the safety, and is very necessary for maintenance. Poor adjustment can cause premature wear or damage to dive some parts

Дата добавления: 2014-12-23