Signal system elec. If the horn fails to sound

M-2

SIGNAL SYSTEM ELEC

SIGNAL SYSTEM CHECK

If the horn fails to sound

2. If the brake light fails to come on:

1. Bulb and bulb socket

Refer to “CHECKING SWITCHES”

section.

NO CONTINUITY

Replace the bulb and/or the bulb socket.

1. HORN switch

Refer to “CHECKING SWITCHES”

section.

NO CONTINUITY

Replace the left handlebar switch.

2. Brake switch (Front/rear)

CONTINUITY

NO CONTINUITY

CONTINUITY

Refer to “CHECKING SWITCHES”

section.

Replace the brake switch.

2. Voltage

• Connect the pocket tester (DC20V) to the horn lead

Tester (+) lead—( Brown terminalØ Tester (-) lead—( Frame ground

• Turn the main switch to on.“f” • Check for voltage (12V) on the “Brown” lead at the horn terminal.

MEETS SPECIFICATION

CONTINUITY

3. Horn

• Connect the pocket tester (DC20V) to the horn at the “pink” terminal.

Tester (+) lead—( Pink terminalØ Tester (-) lead—( Frame ground

• Turn the main switch to on.“f” • Check for voltage on the “Pink” lead to frame ground.

Adjust or change the horn.

MEETS SPECIFICATION

CONTINUITY

The wiring circuit form the main switch to the horn is faulty. Repair

NO CONTINUITY

Replace the horn.

This circuit is not faulty

MEETS SPECIFICATION

3. Voltage

• Connect the pocket tester (DC20V) to the bulb soc- ket connector.

Tester (+) lead—(Yellow terminal Tester (-) lead—( Black terminal

• Turn the main switch to on. • The brake lever is pulled in. • Check for voltage (12V) of the “Yellow” lead on the bulb socket connector.

OUT OF SPECIFICATION

4. Wiring connection

• Wiring circuit form the main switch to the bulb socket connector is faulty. Repair. Refer to “SIGNAL SYSTEM WIRING DIAGRAM”

Дата добавления: 2014-12-23