Text 4. Early concrete

1. What is “pozzoulana”?

Much has been written about the numerous significant buildings of the Roman Empire constructed using "concrete" as the primary structural material. Many researchers believe that the first use of a truly cementitious binding agent (as opposed to the ordinary lime commonly used in ancient mortars) occurred in southern Italy in about the second century B.C. A Special type of volcanic sand called pozzuolana, first found near Pozzuoli in the bay of Naples, was used extensively by the Romans in their cement. It is certain that to build the Porticus Aemelia, a large warehouse constructed in 193 B.C., pozzuolana was used to bind stones together to make "concrete." This unusual sand reacts chemically with lime and water to solidify into a rocklike mass, even when fully submerged. The Romans used it for bridges, docks, storm drains, and aqueducts as well as for buildings.

2. What technique did the Romans use to construct buildings?

Roman concrete bears little resemblance to modern Portland cement concrete. It was never in a plastic state that could flow into a mold or a construction of formwork. Indeed, there is no clear dividing line between what could be called the first concrete and what might be more correctly termed cemented rubble. Roman concrete was constructed in layers by packing mortar by hand in and around stones of various sizes. This assembly was faced with clay bricks on both sides, unless it was below grade, and in the case of walls the wythes of bricks served as forms for the "concrete" (Boethius and Ward-Perkins, 1970).

3. Was the early cement used throughout Europe?

It is known that the bricks had little structural value and were used to facilitate construction and as surface decoration. There is little doubt that the pozzuolanic material made this type of construction possible, as it was used throughout the Rome/Naples area but is not seen in northern Italy, nor elsewhere in the Roman Empire.

Most public buildings, including the Pantheon, and fashionable residences in Rome used brick faced concrete construction for walls and vaults. The domed Pantheon, constructed in the second century A.D., is certainly one of the structural masterpieces of all time. It is a highly sophisticated structure with many weight-reducing voids, niches, and small vaulted spaces.

4. Why wasn’t pozzuolan cement used widely in the world?

The builders of the Pantheon knew enough to use very heavy aggregates at the ground level and ones of decreasing density higher up in the walls and in the dome itself in order to reduce the weight to be carried. The Pantheon's clear span of 142 ft dwarfed previous spans and created nothing less than an architectural revolution in terms of the way interior space was perceived.

Probably due to the lack of availability of similar pozzuolans throughout the world, this type of concrete was not used elsewhere and stone and brick masonry continued to be the dominant construction materials for most of the world's significant buildings for many centuries.

5. Who was the first person to patent Portland cement?

A type of concrete was first seen again in eighteenth-century France, where stuccoed rubble made to emulate true masonry became fashionable. Francois Cointeraux, a mason in Lyon, searched for an economical means of making fireproof walls by using cementitious mortar in combination with the very ancient pise or "rammed earth" construction technique. Pise calls for the use of timber formwork to contain the clay or mud while it is being compacted, but the use of new and stronger cements made the compacting process unnecessary. In 1824 Joseph Aspdin, an English mason, patented an improved cement which he called Portland cement because it resembled a natural stone quarried on the nearby Isle of Portland. It is generally believed that Aspdin was the first to use high temperatures to heat alumina and silica materials which resulted in fusion. Cement is still made this way today. During the nineteenth century concrete was used for many buildings in Europe, often of an industrial nature, as this "new" material did not have the social acceptability of stone or brick.

from "Reinforced Concrete: Preliminary Design for Architects and Builders"
by R.E. Shaeffer, McGraw-Hill, 1992.

Read text 5. Alternatives to Regular Concrete

a) Read the text without a dictionary. Guess the meaning of the unknown words that you may come across.

Дата добавления: 2014-12-23