After work is over

If something unusual accurs and you are unable to stop the cutter, turn the power off or unplug it

Copy Function

Setup

In ONLINE status, when you press the SETUP key, the green light is on, and the baud rate of serial port can be changed. If you press SETUP key again, it will restore to online status.

Caution:

Unless professional technicians, youЎЇre not suggested to change this setting.

Press the OFFLINE, SETUP and ORIGIN keys the machine will re-cut all the data output of the last setting. The machine wonЎЇt re-cut if the green RESET light is flashing, it means the output data is more than the buffer capacity. In this case press RESET to restart the cutting work.

Caution:

After work is overЎ­

1.Remove the paper.

2.Remove the cutter holder or plotter holder, then wipe it clean with a soft-cloth and keep it properly.

3.Turn off the power, and pull the power cord out if not using during a long time.

4.Cover the machine with a cloth or a cover.

Дата добавления: 2014-12-23