How to use the Conversion Table

GEN INFO

HOW TO USE THE CONVERSION TABLE

B-4

GEN INFO

IMPORTANT INFORMATION

CHECKING CONNECTIONS

When cleaning dirt from the connections.

1. Disconnect:

• Connector

2. Dry each terminal with compressed air.

3. Plug in and plug out the connector two or three times.

4. Pull the lead to check the connection is secure.

5. If the connection comes apart, secure it using the tabs at the edge of the terminal Ø.

6. Connect:

• Connector

NOTE:

The two connectors should ‘click’ together

7. Check continuity with a tester

NOTE:

Clean the terminals if there is no continuity

Work through the seven points outlined above when checking the electrical system

Any commercially available revitaliser can provide a ‘field remedy’

Check the connection with the tester as shown

The manual uses both the Metric and the Imperial systems. Use the table below to convert from Metric data into its Imperial equivalents.

For example,

METRIC		MULTIPLIED BY		IMPERIAL
** mm	x	0.03937	=	** in
2 mm	x	0.03937	=	0,08 in

METRIC TO IMPERIAL
	Source data	Multiplied by	Target data
Torque a	m•kg	7,233	ft•lb
m•kg	86,794	in•lb
cm•kg	0,0723	ft•lb
cm•kg	0,8679	in•lb
Weight	kg	2,205	lb
g	0,03527	oz
Distance	km/hr	0,6214	mph
km	0,6214	mi
m	3,281	ft
m	1,094	yd
cm	0,3937	in
mm	0,03937	in
Volume/Capacity	cc (cm3)	0,03527	oz (IMP liq.)
cc (cm3)	0,6102	cu•in
lit (litre)	0,8799	qt (IMP liq.)
lit (litre)	0,2199	gal (IMP liq.)
Others	kg/mm	55,997	lb/in
kg/cm2	14,2234	psi (lb/in3)
Centigrade	9/5(°C)+32	Fahrenheit (ºF)

CONVERSION TABLE

Дата добавления: 2014-12-23