Maintenance specifications

Item	Standard	Limit
Cylinder head: Warp limit	YP125D	YP150D	0,03 mm
•••
Cylinder: Bore size Out of round limit	53,700 ~ 53,705 •••	59,5 ~ 59,515	••• 0,03 mm
Camshaft: Cam dimensions Intake “A” “B” “C” Exhaust “A” “B” “C” Camshaft runout limit	30,811 ~ 30,911 mm 25,145 ~ 25,245 mm 5,666 mm 30,811 ~ 30,911 mm 25,152 ~ 25,252 mm 5,659 mm •••	30,711 mm 25,045 mm ••• 30,711 mm 25,052 mm ••• 0,03 mm
Cam chain: Cam chain type/No. of links	82 RH2005 / 94	•••
Rocker arm/rocker arm shaft:Rocker arm inside diameter Shaft outside diameter Arm-to-shaft clearance	11,990 ~ 12,028 mm 11,981 ~ 11,991 mm 0,009 ~ 0,037 mm	••• ••• •••
Valve, valve seat, valve guide: Valve clearance (cold) IN EX     Valve dimensions     Head diameter Face Width     “A” Head diameter IN EX “B” Face width IN EX Stem outside diameter IN EX Stem inside dimater IN EX	0,10 ~ 0,14 mm 0,16 ~ 0,20 mm     26,9 ~ 27,1 mm 22,9 ~ 23,1 mm 2,687 ~ 3,252 mm 2,687 ~ 3,252 mm 4,475 ~ 4,490 mm 4,460 ~ 4,475 mm 4,500 ~ 4,512 mm 4,500 ~ 4,512 mm	••• •••     ••• ••• ••• ••• ••• ••• ••• •••

*Load is the total weigh of cargo, rider, passenger, and accessories.

Item	Standard	Limit
Automatic centrigual clutch:	YP125D	YP150D	1,5 mm
2,0 mm 28 mm
Clutch shoe tickness
Clutch shoe spring free length	•••
Clutch - in revolution	3800±250 r/min 6400±500 r/min	3500±250 r/min 6000±400 r/min	•••
Cluth - stall revolution	•••
V-belt: V-belt width	21 mm	•••
Carburetor: Type I.D. mark Main jet Main air jet Jet needle Pilot air jet Needle Jet Pilot jet Pilot screw Valve seat size Starter jet 1 Engine idle speed Intake vacuum Oil temperature Coolant temperature CO%	(M.J.) (M.A.J.) (J.N.) (P.A.J.1) (N.J.) (P.J.) (P.S.) (V.S.) (G.S.1)	Z24V-1D/1	•••
5NR	5KD
# 116	# 114	•••
ø 1,0	ø 1,4	•••
4E31 - 3/5	4E32 - 3/5	•••
ø 1,3 ø 2,590	•••
•••
# 38	# 36	•••
2 1/2 ± 1/4	3 ± 1/4	•••
2,00 mm	•••
# 45	•••
1600 ~ 1800 r/min	•••
200 ~ 260 mmHg	•••
65 ~ 75 ºC	•••
75 º ~ 85 º C	•••
2,5 ~ 4,5 %	3%	•••
Oil pump	Trochoid type	•••
Type
Tip clearance	•••	0,15 mm
Side clearance	•••	0,15 mm
Housing and rotor clearance	•••	0,07 mm
Radiator:	Cooling fin with electric fan	•••
Type
Width/height/thickness	166,4/220/23	•••
Radiator cap opening pressure	110 kPa (1,1 kg/cm2,1,1 bar)	•••
Reservoir tank capacity	0,60 L	•••

MAINTENANCE SPECIFICATIONS SPEC

Дата добавления: 2014-12-23