General specifications spec

C-2

B-6

GEN INFO

DEDICATED TOOLS

TOOL NUMBER	TOOL NUMBER AND USE	Illustration
90890-03141	Timing light   required for setting the engine timing
90890-04101	Valve lapper   (used for removing and installing the lifter and for lapping the valve)
90890-04019 -04108	Valve spring compressor attachment   (used for removing or installing the valve and the valve spring)
90890-04116	Valve guide puller
90890-04117	Valve guide installer
90890-04118	Valve guide reamer
90890-06754	Ignition checker   necessary for checking the ignition system components
90890-85505	Yamaha bond No. 1215   this sealant (bond) is used for the crankcase mating surface

SPEC

Model	YP125D	YP150D
Air filter:Carburetor side Crankcase side	Dry tpe element Wet type element
Fuel: Type Fuel tank capacity	Regular unleaded gasoline 10,5 L
Carburetor:Type/quantity Manufacturer	Z24V-1D/1 TEIKEI
Spark plug:Type Manufacturer Spark plug gap	CR8E NGK 0,7 ~ 0,8 mm
Clutch type:	Dry, centrigual automatic
Transmission: Primary reduction system Primary reduction ratio Secondary reduction system Secondary reduction ratio Transmission type Operation	Helical gear 40/15(2.666) Sper gear
42/12 (3.666)	42/14 (3.000)
Single speed automatic (V-belt type) Centrifugal automatic type
Chassis:Chassis type Caster angle Trail	Steel tube under-bone 28° 104 mm
Tyre: Type Size front rear	Tubeless 120/70-12 51 L 130/70-12 56 L
Tyre pressure (cold tyre): Maximum load (excluding motorcycle) Loading condition A* front rear Loading condition B* front rear	183kg 0 ~ 90kg 190 kPa (1,9 kg/cm2, 1,9 bar) 220 kPa (2,2 kg/cm2, 2,2 bar) 90 ~ kg 190 kPa (1,9 kg/cm2, 1,9 bar) 240 kPa (2,4 kg/cm2, 2,4 bar)

GENERAL SPECIFICATIONS SPEC

GENERAL SPECIFICATIONS

Дата добавления: 2014-12-23