GEN info

DEDICATED TOOLS

B-5

GEN INFO

DEDICATED TOOLS

TOOL NUMBER	TOOL NUMBER AND USE	Illustration
90890-01337	Clutch spring compressor
-01464
used to hold the clutch while removing
or replacing the clutchplate
holding nut
90890-01348	Locknut wrench   used when removing or installing the secondary sheave nut
90890-01367	Fork seal driver weight
-01368	Fork seal driver attachment
used when installing the fork seal
90890-01403	Ring nut wrench   used to loosen and tighten the steering ring nut
90890-01701	Sheave holder   used for holding the secondary sheave
90890-03079	Thickness gauges   used to measure the valve clearance
90890-03081	Compression gauge   used to measure engine compression
90890-03112	Pocket tester   invaluable for checking the electrical system

DEDICATED TOOLS

It is important to use the correct tools when tuning up and assembling an engine.

TOOL NUMBER	TOOL NUMBER AND USE	Illustration
90793-80009	Tachometer   for determining engine RPM
90890-01083	Rocker arm shaft puller bolt
-01084
used to remove or install the
rocker arm shafts.
90890-01189	Rotor holding tool   used to remove the rotor
90890-01235	Flywheel puller   used for holding the flywheel magneto during adjustment
90890-01268	Ring nut wrench   used to loosen and tighten the exhaust pipe
90890-01311	Valve adjusting tool   necessary for adjusting valve clearance
90890-01312	Fuel level gauge   used to measure the fuel level in the float chamber
90890-01325	Radiator cap tester
-01352	adapter
used for checking the cooling system
90890-01326	T-handle
-01294	Damper rod holder
used for loosening and tightening
the damper rod holder screw for
the front fork rod

If the wrong tools are used, or incorrect procedures followed, the scooter may be damaged. To avoid mistakes, please consult the following list before placing an order.

Дата добавления: 2014-12-23