Front fork chas. Never reuse the oil seal

Mm

Never reuse the oil seal.

FRONT FORK CHAS

J-15

Stand the scooter on a level surface Stand the scooter on its centre stand

Securely support the scooter so there is no dan- ger of it falling over.

FRONT FORK REMOVAL

s WARNING:

1. Loosen:

1 • Bolts (lower shank) Ø

2. Extract:

• Retaining clip

• Cap bolt Ø

FRONT FORK DISASSEMBLY

1. Remove:

• Cap

• Spring

• Bolt (damper rod) Ø

Loosen the bolt (damper rod) Ø while holding the damper rod with T-handle Ø and holder Ø

2. Remove:

• Inner tube

• Oil lock piece.

3. Remove:

• Oil seal Ø

CAUTION

Ø Rag

FRONT FORK INSPECTION

1. Inspect:

• Inner tube bending

Inner tube bending limit:

Scratches/bends/damage —(Replace

s WARNING

Do not attempt to straighten a bent inner tube as this may dangerously weaken the tube.

2. Measure:

• Fork spring §a

	Fork spring free length: 287.4 mm
<Wear limit> 281.7 mm

Over the specified limit —(replace

FRONT FORK ASSEMBLY

Reverse the disassembly procedure. Note the following points:

1. Install:

• Damper rod Ø

• Rebound spring

• Oil lock piece Ø

• Inner tube Ø

2. Install:

• Inner stall Ø

Into outer tube Ø

Дата добавления: 2014-12-23