Handlebar chas

K-1

FRONT FORK CHAS

FRONT FORK INSTALLATION

Reverse the “REMOVAL” procedure. Note the following points:

1. Install:

• Front fork Ø

• Temporarily tighten the pinch bolts.

HANDLEBAR

NOTE:

Pull up the inner tube until tie end flushes the top of the under bracket Ø, then temporarily tighten the bolt (under bracket lower) Ø.

2. Tighten:

1 • Pinch bolts (under bracket upper / lower) Ø

23 Nm (2.3 m•kg)

3. Insert

• Tube cap

Order	Job name/Part name	Quantity	Remarks
	Handlebar removal Upper and lower handlebar cover   Right handlebar switch Left handlebar switch Front brake switch Rear brake switch Throttle cable Rear brake hose Front brake cable Throttle grip			Remove the parts in order. Refer to “CONVER AND PANEL” section in Chapter 3.
		Refer to “HANDLEBAR INSTALLATION” section.
	Refer to “HANDLEBAR INSTALLATION” section

Дата добавления: 2014-12-23