Do not lay the front wheel on the ground with the disc facing down. This can damage or warp the disc. Place blocks under the wheel so that the disc does not touch the ground

CAUTION

Wheels (Rims)

Special Tools

Inside Circlip Pliers: 57001-143

Bearing Driver Set: 57001-1129

Oil Seal & Bearing Remover: 57001-1058

Jack: 57001-1238

Rim Protector: 57001-1063

Bearing Remover Head, </>15 × ф17: 57001-1267

Bead Breaker Assembly: 57001-1072

Bearing Remover Shaft, 013: 57001-1377

10-6 WHEELS/TIRES

Front Wheel Removal

• Remove the cap.

• Remove the cotter pin [A] and loosen the front axle nut [B].

• Raise the front wheel off the ground using the jack.

Special Tool - Jack: 57001-1238

• Remove the speedometer cable lower end [A].

• Remove the nut and pull out the axle [B] to the right, and remove the front wheel, speedometer gear housing, and collars.

Front Wheel Installation

• Install the speedometer gear housing so that its projec­tions [A] fit into the gear drive notches [B] in the wheel hub. Fit the collar on the right hand side of the hub.

• Fit the speedometer gear housing stop [A] to the fork leg stop [B].

• Tighten the axle nut.

Torque - Front Axle Nut: 88 N·m (9.0 kgf·m, 65 ft·lb)

• Install the speedometer cable lower end.
Check the front brake.