Caution

NOTE

Meter Unit

ELECTRICAL SYSTEM

• Remove the screws [A] for removal of each unit. Tachometer [B] Speedometer [C] Speedometer Gear [D]

○Turns out the trip knob counterclockwise before remov­ing the speedometer mounting screws.

Tachometer Inspection

• Check the tachometer circuit wiring (see Wiring Inspec­tion).

• If all wiring and components other than the tachometer unit check out good, the unit is suspect. Check the unit as shown.

ORemove: upper fairing headlight body (see Headlight Unit/Housing Removal).

O Disconnect the tachometer connector [A].

O Connect the tachometer connector using an auxiliary

wires for BR [B] and BK/Y [C] leads.

O Turn the ignition switch ON.

O Open and connect the BR lead to the BK tachometer lead repeatedly.

O Then the tachometer needle [A] should flick [B].

O Turn the ignition switch OFF

• If the needle does not flick, replace the tachometer unit.

Bulb Replacement

• To remove the wedge-base type bulb [A], pull the bulb out of the socket [B].

Do not turn the bulb. Pull the bulb out to prevent damage to the bulb. Do not use bulb rated for other than voltage or wattage specified in the wiring dia­gram.

Дата добавления: 2014-12-23